Table of Contents
Advertisement
Macintosh
Confirm that the access lamp is not lit and then drag the mass-storage device icon and drop it into
the trash.
Turn the camera off and disconnect the USB cable.
• If the USB cable is disconnected before performing the first step, an alert message will appear.
Always complete the first step before disconnecting the USB cable.
A confirmation screen will appear to indicate the devices
to be stopped. Clicking "OK" will stop the device.
A third and final screen will appear to indicate the camera
can be safely disconnected from the computer. Turn the
camera off and then disconnect the USB cable.
On the unplug-or-eject-hardware
window, the hardware devices to
be stopped will be displayed.
Highlight the device by clicking on
it then click "Stop."
115
Hide quick links:
Advertisement
Table of Contents
