About Ni-Mh Batteries; About The Dimage Viewer - Minolta DiMAGE E223 Instruction Manual

About Ni-MH batteries

When using Ni-MH batteries, clean both battery terminals with dry cloth to wipe off any dirt or
residue. Because of the sophisticated computer system, the camera critically monitor power levels. If
the battery terminals are dirty, the camera may give a false low-battery warning. If battery perform-
ance is unusually low, wipe the battery terminals with a clean, dry cloth.
Ni-MH battery performance will decrease if the batteries are often recharged before they have been
fully discharged. Completely exhaust the Ni-MH batteries using the camera before charging.

About the DiMAGE Viewer

The flicker and image-correction functions on the correction menu in the
Movie Enhancer cannot be used with Movie files captured with the DiMAGE
E223. A computer system error will occur.
The following marks may be found on the product:
This mark on your camera certifies that this camera meets the
requirements of the EU (European Union) concerning interference
causing equipment regulations. CE stands for Conformité Européenne
(European Conformity).
DiMAGE E223
Digital Camera:
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
60 APPENDIX
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Do not remove the ferrite cores from the cables.
Tested by the Minolta Corporation
101 Williams Drive, Ramsey, New Jersey 07446,
U.S.A.