Connecting To Windows 98 And 98Se; Automatic Installation - Minolta DiMAGE F100 Instruction Manual

D -
ATA TRANSFER MODE

Connecting to Windows 98 and 98SE

The driver needs only to be installed once. If the driver cannot be installed automatically, it can be
installed manually with the operating system's add-new-hardware wizard; see the instructions on the
following page. During installation, if the operating system requests the Windows 98 CD-ROM, inset it
into the CD-ROM drive and follow the accompanying instructions on the screen.

Automatic Installation

108
Before connecting the camera to the com-
puter, place the DiMAGE software CD-
ROM in the CD-ROM drive. The DiMAGE
installer menu should automatically acti-
vate. To automatically install the Windows
98 USB driver, click on the starting-up-
the-USB-device-driver-installer button. A
window will appear to confirm that the dri-
ver should be installed; click "Yes" to con-
tinue.
When the driver has been successfully
installed, a window will appear. Click "OK."
Restart the computer before connecting
the camera (p.
106).