Minolta DiMAGE F100 Instruction Manual
  1. Manuals
  2. Brands
  3. Minolta Manuals
  4. Digital Camera
  5. DiMAGE F100
  6. Instruction manual

Minolta DiMAGE F100 Instruction Manual

Minolta instruction manual digital camera f100
Hide thumbs Also See for DiMAGE F100:
Table of Contents

Advertisement

Quick Links

E
INSTRUCTION MANUAL
9222-2777-11 HA-A204

Advertisement

Table of Contents
loading

Related Manuals for Minolta DiMAGE F100

Summary of Contents for Minolta DiMAGE F100

  • Page 1 INSTRUCTION MANUAL 9222-2777-11 HA-A204...
  • Page 2 EFORE YOU BEGIN Thank you for purchasing this Minolta digital camera. Please take the time to read through this instruction manual so you can enjoy all the features of your new camera. This manual contains information regarding products introduced before May, 2002. To obtain compati- bility information for products released after this date, contact a Minolta Service Facility listed on the back cover of this manual.
  • Page 3 OR PROPER AND SAFE USE Read and understand all warnings and cautions before using this product. Using batteries improperly can cause them to leak harmful solutions, overheat, or explode which may damage property or cause personal injury. Do not ignore the following warnings. •...
  • Page 4 OR PROPER AND SAFE USE • Store this product out of reach of children. Be careful when around children, not to harm them with the product or parts. • Do not fire the flash directly into the eyes. It may damage eyesight. •...
  • Page 5 • Do not use or store the product in a hot or humid environment such as the glove compartment or trunk of a car. It may damage the product and batteries which may result in burns or injuries caused by heat, fire, explosion, or leaking battery fluid. •...

  • Page 6: Table Of Contents

    ABLE OF CONTENTS About this manual The basic operation of this camera is covered between pages 14 and 38. This section of the manual covers the camera parts, preparation of the camera for use, and the basic camera operation for recording, viewing, and deleting images.
  • Page 7 About camera operation ...25 Basic recording operation...26 Focus signals...27 Special focusing situations ...27 Automatic Digital Subject Program Selection ...28 Digital-subject-program button...29 Display button – recording mode...31 Flash modes ...32 Flash range – auto-recording mode ...33 Flash signals...33 Camera-shake warning ...33 Quick View ...34 Quick View display ...35 Deleting images in Quick View ...35...
  • Page 8 ABLE OF CONTENTS White balance...62 Automatic white balance ...62 Preset white balance ...62 Custom white balance ...63 Focus modes ...64 Single-shot AF ...64 Subject Tracking AF ...64 Manual focus...65 Full-time AF ...65 AF sensor display ...66 Metering modes...66 Camera sensitivity – ISO...67 Flash range and camera sensitivity ...67 Digital Effects Control ...68 Date imprinting ...70...
  • Page 9 Viewing images on a television ...94 Setup mode – controlling the camera’s operation...95 Navigating the setup menu...96 LCD monitor brightness...98 Formatting memory cards ...98 Auto power save ...99 Language...99 File number (#) memory ...99 Folder name...100 Audio signals ...100 Shutter FX ...101 Volume...101 Reset default...101 Setting the date and time ...103...

  • Page 10: Names Of Parts

    AMES OF PARTS Camera body * This camera is a sophisticated optical instrument. Care should be taken to keep these surfaces clean. Please read the care and storage instructions in the back of this manual (p. 121). Shutter-release button Self-timer/ Remote-control lamp (p.
  • Page 11 Flash mode/Information button (p. 32, 78) Viewfinder* (p. 12) LCD monitor* Display button (p. 31, 81) QV/Delete button (p. 34) Menu button Digital-subject-program button (p. 29) Exposure-compensation button (p. 52) Battery-chamber door (p. 14) Card-slot door (p. 18) The USB port, AV-out terminal, and DC termi- nal are located behind the terminal cover.

  • Page 12: Viewfinder

    AMES OF PARTS Viewfinder Focus lamp (green) Because the optical viewfinder and the lens are slightly separated, the image seen through one is not exactly the same as the other; this is called parallax. Parallax can cause errors in framing at close distances and is more pronounced at longer focal lengths.

  • Page 13: Data Panel

    Data panel Located on the top of the camera body, the data panel shows the status of the camera. All icons have been shown for clarity. Manual-focus indicator (p. 65) Camera-sensitivity indicator (p. 67) Spot-metering indicator (p. 66) White-balance indicator (p. 62) Drive-mode indicators (p.

  • Page 14: Getting Up And Running

    GETTING UP AND RUNNING Changing the CR-V3 battery This digital camera uses one CR-V3 lithium battery. When replacing the batteries, the mode dial should be in the off position. Open the battery-chamber door by sliding the door toward the bottom of the cam- era (1) to release the safety catch;...

  • Page 15: Installing Aa Batteries

    Installing AA batteries Although performance is better with a CR-V3 lithium battery, two AA-size Ni-MH batteries can also be used. Other types of AA batteries should not be used. When using Ni-MH batteries, fully recharge them with a battery charger suitable for complex electronic equipment. Please consult your vendor about an appropriate charger.

  • Page 16: Battery Condition Indicator

    ETTING UP AND RUNNING Battery condition indicator This camera is equipped with an automatic battery-condition indicator. When the camera is on, the battery-condition indicator appears on the data panel and monitor. The monitor icon will change from white to red when battery power is low. If the data panel and monitor are blank, the battery may be dead or installed incorrectly.

  • Page 17: Connecting The Ac Adapter (Sold Separately)

    Connecting the AC adapter (sold separately) The AC-6 Adapter allows the camera to be powered from an electrical household outlet. The AC Adapter is recommended when the camera is interfaced with a computer or during periods of heavy use. Always turn off the camera before changing between power supplies.

  • Page 18: Changing The Memory Card

    ETTING UP AND RUNNING Changing the memory card An SD Memory Card or MultiMediaCard must be inserted for the camera to operate. If a card has not been inserted, a no-card warning will automatically be displayed on the monitor and three dashes (– –...

  • Page 19: About Memory Cards

    If the card-not-recognized message appears, the inserted card in the camera may need to be format- ted. A card used in another camera may have to be formatted before being used. If the unable-to- use-card message appears, the card is not compatible with the camera and cannot be formatted. A card is formatted in the basic section of the setup menu (p.

  • Page 20: Setting The Date And Time

    ETTING UP AND RUNNING Setting the date and time After initially inserting a memory card and battery, the camera’s clock and calendar must be set. When images are recorded, the image data is saved with the date and time of recording. Depending on the region, the menu language may also have to be set.
  • Page 21 Custom1 Custom2 Basic – Reset default – Date/Time set Date format YYYY/MM/DD Video output NTSC Playback menu: custom 2 section Use the left and right keys to select the item to be changed. Use the up and down keys to adjust the item. Press the central button to set the clock and calen- dar.

  • Page 22: Auto-Recording Mode Basic Operation

    RECORDING MODE AUTO-RECORDING MODE BASIC OPERATION This section covers the basic operation of this camera. Thoroughly familiarize yourself with the opera- tions in this section before moving on to the other sections in the manual. The sophisticated technology employed in the auto-recording mode frees the photographer from complicated camera settings to be able to simply concentrate on the subject and composition.

  • Page 23: Setting The Camera To Record Images Automatically

    Setting the camera to record images automatically Exposure mode Metering mode Camera sensitivity (ISO) Flash mode Focus area Focus control Drive mode Exposure compensation Sharpness Color mode White balance Full-time AF * Changes to the flash mode or exposure compensation will be reset when the mode dial is turned to another position.

  • Page 24: Using The Zoom Lens

    RECORDING MODE Using the zoom lens This camera is equipped with a 7.8 to 23.4mm optical zoom. This is equivalent to a 38 to 114mm zoom lens on a 35mm camera. In 35mm photography, focal lengths below 50mm are referred to as wide-angle;...

  • Page 25: About Camera Operation

    About camera operation The auto-recording mode uses advanced technology to make beautiful photography as effortless as possible. Automatic Digital Subject Program Selection optimizes exposure, color, and image-process- ing settings to each subject. The sophisticated AF system locates and tracks the subject automatical- Automatic Digital Subject Program Selection –...

  • Page 26: Basic Recording Operation

    RECORDING MODE Basic recording operation With the mode dial set to auto recording, the camera will be on and the LCD monitor will activate. Auto recording mode uses two advanced AF systems. Area AF and Subject Tracking AF, to locate and track the subject in the the extra-wide focus frames.

  • Page 27: Focus Signals

    Focus signals This digital camera has a quick, accurate autofocusing system. The focus icon in the lower right cor- ner of the LCD monitor and the green focus lamp next to the viewfinder indicate the focus status. Focus icon: white...

  • Page 28: Automatic Digital Subject Program Selection

    RECORDING MODE Automatic Digital Subject Program Selection Automatic Digital Program Selection chooses between programmed AE and one of five subject pro- grams: portrait, sport action, landscape, sunset, and night portrait. The digital-subject-programs opti- mise the camera’s performance for various conditions and subjects. Exposure, white-balance, and image-processing systems work in unison for beautiful results.

  • Page 29: Digital-Subject-Program Button

    Digital-subject-program button with subject programs. The flash mode (p. 32) can be changed and the exposure can be altered using the exposure-compensation function (p. 52). In extreme lighting conditions, changes in expo- sure compensation may not produce the intended results in the portrait, or night portrait mode. The camera-shake warning (p.
  • Page 30 RECORDING MODE MACRO – used for close-up photography between 20 and 60 cm (0.7 – 2.0ft) from the CCD. The lens will automatically zoom to the macro position and cannot be changed. Because of parallax, the LCD monitor should be used to compose the picture.

  • Page 31: Display Button - Recording Mode

    Display button – recording mode The display-information button controls the LCD monitor display. The display cycles to the next posi- tion each time the button is pressed: full display, live image only, and monitor off. Battery power can be conserved by turning the monitor off and using the viewfinder to take pictures. When the menu or exposure-compensation button is pressed, or the macro mode is activated, the monitor will automatically turn on.

  • Page 32: Flash Modes

    RECORDING MODE Flash modes To set the flash mode, simply press the flash mode button (1) on the back of the camera until the desired mode is displayed. Autoflash – the flash fires automatically in low- light and backlit conditions. Red-eye reduction –...

  • Page 33: Flash Range - Auto-Recording Mode

    Flash range – auto-recording mode The camera will automatically control the flash output. For well-exposed images, the subject must be within the flash range. Because of the optical system, the flash range is not the same at the lens’ wide-angle position as it is at the telephoto position. Wide-angle position Telephoto position Flash signals...

  • Page 34: Quick View

    RECORDING MODE Quick View Captured images can be viewed in auto-recording and multi-function recording mode. Simply press the QV/Delete button to access the images. The date and time of capture, frame number, printing status, lock status, image size, and image quali- ty are displayed with the images.

  • Page 35: Quick View Display

    Mode indicator Time of capture Date of capture Audio-track indicator Lock indicator (p. 86) Print indicator (p. 90) Frame number/total number of images Deleting images in Quick View In quick view, the displayed image can be deleted. When selecting an image for deletion, a confirmation screen will appear before the opera- tion is executed.

  • Page 36: Enlarged Playback

    RECORDING MODE Enlarged playback In Quick View or in single-frame playback (p. 77), a still image can be enlarged in six steps for closer examination: 1.5X, 2.0X, 2.5X, 3.0X, 3.5X, 4.0X, 4.5X, and 5.0X. With the image to be magnified displayed, press the up key of the controller to activate the enlarged playback mode.

  • Page 37: Other Quick View Features

    Other Quick View features Voice memos (p. 48) and audio captions (p. 87) can be played back in Quick View. When one of these audio tracks is attached to a still image, the audio-track indicator will be displayed at the bottom of the monitor. Stop Vol.

  • Page 38: Navigating The Auto-Recording Mode Menu

    RECORDING MODE Navigating the auto-recording mode menu In auto-recording mode, the menu button(1) turns the menu on and off. The four-way keys of the controller (2) are used to move the cursor in the menu. Pressing the center of the controller will enter a setting.
  • Page 39 Basic Drive mode Single Continuous Timer/RC Bracketing Image size 2272 X 1704 1600 x 1200 1280 X 960 640 X 480 Quality Super fine Fine Standard Economy Voice memo 15 sec. 5 sec. Digital zoom On/Off select enter Use the left/right keys to select the bracketing incre- ment (p.

  • Page 40: Drive Modes

    RECORDING MODE Drive modes The drive modes control the rate and method of image capture. Icons indicating the selected drive mode appear on the data panel and LCD monitor. Data panel Single-frame advance Continuous advance Self-timer/ Remote control Bracketing LCD monitor All icons have been shown for clarity.

  • Page 41: Continuous Advance

    Continuous advance The continuous-advance drive mode allows a series of images to be captured while holding down the shutter-release button. Continuous advance acts like a motor drive on a film camera. The number of images that can be captured at one time and the rate of capture depend on the image-quality and image-size setting.

  • Page 42: Self-Timer

    RECORDING MODE Self-timer Used for self-portraits, the self-timer will delay the release of the shutter for approximately ten sec- onds after the shutter-release button is pressed. When the drive mode is set to self-timer, the focus mode is changed from Subject Tracking AF to single-shot AF allowing the use of focus lock (p.

  • Page 43: Remote Control (Sold Separately)

    INGLE SHOT Remote control (sold separately) The IR Remote Control RC-3 allows remote camera operation up to 5m (16 ft.) away. The remote control unit can be used in movie recording (p. 75). Emitter window Delay button Release button Place the camera on a tripod, and set the drive mode to self-timer / remote control (p.

  • Page 44: Bracketing

    RECORDING MODE Bracketing This mode makes a three-image bracket of a scene. Bracketing is a method of taking a series of images of a static subject in which each image has a slight variation in exposure. The bracketing mode is set on the auto-recording mode menu (p. 38) or in the basic section of the multi-function recording mode menu (p.
  • Page 45 Compose the picture as described in the basic recording operation section (p. 26). Press the shutter-release button partway down (1) to lock onto the subject and set the exposure for the series. Press and hold the shutter-release button all the way down (2) to make the brack- et series;...

  • Page 46: Image Size And Image Quality

    RECORDING MODE Image size and image quality Changing image size Data panel affects the number of pixels in each image. The greater the image size, the larger the file size. Choose image size based on the final use of the image – smaller images will be more suit- able for web sites whereas larger sizes will produce...
  • Page 47 File formats vary with the image quality setting. Super fine images are saved as a TIFF file. The fine, standard, and economy settings are formatted as a JPEG file. Super fine, fine, standard, and econo- my files can be recorded as color or monochrome images (p. 68) in the multi-function recording mode.

  • Page 48: Voice Memo

    RECORDING MODE Voice memo Voice memo allows a five or fifteen second audio track to be recorded with a still image. The function is activated and the length of the recording time is set on the auto-recording mode menu (p. 38) or in the custom 2 section of the multi-function recording menu (p.

  • Page 49: Digital Zoom

    Digital zoom The digital zoom is activated on the auto-recording mode menu (p. 38) and in the custom 2 section of the multi-function recording mode menu (p. 56). The digital zoom extends the power of the telephoto position of the optical zoom by up to two and a half times in six steps: 1.25X, 1.5X, 1.75X, 2.0X, 2.25X, and 2.5X.

  • Page 50: Focus Area Selection

    RECORDING MODE Focus area selection Individual focus areas can be selected. Press and hold the controller (1) until the Area-AF frame lines change to the spot-focus-area display. Press and hold the con- troller again to return to the Area-AF frame lines. Once a focus area is selected, it will remain active even after the picture has been taken.

  • Page 51: Focus Lock

    Focus lock Focus lock can be used with off-center subjects or when a special focusing situation prevents the camera from focusing (p.27). This function is controlled with the shutter-release button and can be used with focus area selection and single-shot AF (p. 64). Focus signal Focus icon: white Focus lamp: steady...

  • Page 52: Exposure Compensation

    RECORDING MODE Exposure compensation The camera exposure can be adjusted to make the final picture lighter or darker by as much as ±2EV in 1/3 increments. The exposure-compensation value will remain in effect until it has been reset. In auto-recording mode, exposure compensation is also reset when the mode dial is moved to another position.

  • Page 53: What Is An Ev? What Is A Stop

    Shooting tips Sometimes the camera’s exposure meter is deceived by certain conditions. Exposure compensation can be used in these situations. For example, a very bright scene, such as a snowy landscape or a white sandy beach, can appear too dark in the captured image. Before taking the pic- ture, adjusting the exposure by +1 or +2 EV will result in an image with normal tonal values.

  • Page 54: Multi-Function Recording Mode Advanced Operation

    ULTI FUNCTION RECORDING MULTI-FUNCTION RECORDING MODE ADVANCED OPERATION Except for digital subject programs, the basic operation of the camera in multi-function recording mode is identical to the auto-recording mode. Thoroughly familiarize yourself with the previous sec- tion before moving on. The multi-function recording mode allows greater control over image making.

  • Page 55: Multi-Function Recording Mode Display

    Multi-function recording mode display a. Macro-mode indicator (p. 29) b. Microphone indicator c. Mode indicator d. Flash-mode indicator (p. 32) e. Sharpness, Contrast, and Color- saturation-compensation displays (p. 68) f. Exposure-compensation display (p. 52) g. White-balance indicator (p. 62) h. Exposure-mode indicator (p. 58) i.

  • Page 56: Navigating The Multi-Function Recording Mode Menu

    ULTI FUNCTION RECORDING Navigating the multi-function recording mode menu In multi-function recording mode, the menu button turns the menu on and off. The four-way keys of the controller are used to move the cursor in the menu. Pressing the center of the controller will enter a setting.
  • Page 57 Basic Exposure mode Program Aperture priority Shutter priority Manual Drive mode Single Continuous Self-timer Bracketing Image size 2272 X 1704 1600 x 1200 1280 X 960 640 X 480 Quality Super fine Fine Standard Economy White balance Cust set CustRecall Auto Preset Refer to the auto-recording mode section...

  • Page 58: Exposure Modes

    ULTI FUNCTION RECORDING Exposure modes Programmed AE – P The program exposure mode controls both the shutter speed and aperture to ensure perfect expo- sures. The sophisticated exposure system allows the photographer the freedom to shoot without hav- ing to worry about the technical details of exposure settings. The shutter speed and aperture values of the exposure are displayed on the monitor.

  • Page 59: Shutter Priority - S

    Because the maximum aperture is not the same at the wide-angle and telephoto position, as the lens is zoomed, the aperture will automatically shift. If the aperture value is beyond the shutter-speed range, the shutter-speed display will turn red on the monitor. Shutter priority –...

  • Page 60: Manual Exposure - M

    ULTI FUNCTION RECORDING Manual exposure – M Manual exposure mode allows individual selection of shutter speeds and apertures. This mode overrides the exposure system giving the photographer total control over the final exposure. As changes are made to the exposure, the effect will not be visible on the monitor. The shutter-speed and aperture display will turn red on the monitor if the image is underexposed or overexposed by more than 1 EV.

  • Page 61: Bulb Exposures

    Bulb exposures Bulb photographs can be taken in the manual-exposure mode. Exposures up to fifteen seconds can be made by pressing and holding the shutter-release button. The use of a tripod is recommended for bulb exposures. Use the controller (1) to decrease the shutter-speed value below four seconds until “bulb”...

  • Page 62: White Balance

    ULTI FUNCTION RECORDING White balance White balance is the camera’s ability to make different types of lighting appear neutral. The effect is similar to selecting daylight or tungsten film, or using color compensating filters in conventional pho- tography. An icon will be displayed on the monitor if a setting other than auto white-balance is cho- sen.

  • Page 63: Custom White Balance

    Use the left/right keys of the controller (1) to select the preset setting. An icon is displayed in the bottom left cor- ner of the screen and the live image shows the effect of the white-balance setting. Press the central button of the controller (2) to apply the setting.

  • Page 64: Focus Modes

    ULTI FUNCTION RECORDING Focus modes This camera has autofocus and manual focus control. The focus mode is set in the custom 1 section of the multi-function recording mode menu (p. 56). Autofocus will produce excellent results in almost every situation, however, under certain conditions, the autofocus system will not work accurately;...

  • Page 65: Manual Focus

    Manual focus After setting the camera to the manual focus mode (MF), “ZOOM” and “FOCUS” will appear at the top of the LCD monitor. Press the center of the controller to switch between the two functions; the function highlighted in blue is active. With “FOCUS” highlighted, use the up/down keys of the con- troller to focus;...

  • Page 66: Af Sensor Display

    ULTI FUNCTION RECORDING AF sensor display When using Area AF, the AF-sensor display indicating the point of focus can be turned off. The Area- AF focus frames will remain on the display when the shutter-release button is pressed partway down. Metering modes The icons indicating both metering modes are displayed on the monitor only.

  • Page 67: Camera Sensitivity Iso

    Camera sensitivity ISO Five camera sensitivity settings can be selected: Auto, 100, 200, 400, and 800; the numerical values are based on an ISO equivalent. ISO is the standard used to indicate film sensitivity: the higher the number, the more sensitive the film. Camera sensitivity is set in the custom 1 section of the multi- function recording mode menu (p.

  • Page 68: Digital Effects Control

    ULTI FUNCTION RECORDING Digital Effects Control Changes in color, sharpness, contrast, and saturation can be made using the custom 2 section of the multi-function recording mode menu (p. 56). These imaging controls give photographers the ability to optimise the image information at the scene. For example, if a scene is too contrasty, information can be lost in the shadows and highlights;...
  • Page 69 To change color, sharpness, contrast, or saturation, select the setting from the Digital Effects Control option in the custom 2 section of the multi-function recording mode menu; the setting screen will open. select enter The setting will remain in effect until it is changed. If sharpness, contrast, or color saturation is set to any setting other than normal, an icon will be displayed indicating an increase (+) or decrease (–) in the quality selected.

  • Page 70: Date Imprinting

    ULTI FUNCTION RECORDING Date imprinting The date of recording can be printed directly on the image. The imprint- ing function must be activated before the image is taken. Once activat- ed, the date will continue to be imprinted until the function is reset; a yellow bar is displayed behind the frame counter on the monitor to indi- cate the imprinting function is active.

  • Page 71: Instant Playback

    Instant playback After an image is captured, it can be displayed on the monitor before being saved. When used with the continuous-advance or bracketing drive modes (p. 40), thumbnails of the last six images in the series will be displayed. Instant playback is activated in the custom 2 section of the multi-function recording menu (p.

  • Page 72: Ashort Guide To Photography

    SHORT GUIDE TO PHOTOGRAPHY Photography can be a rewarding pursuit. It is a broad and disciplined field that can take years to master. But the pleasure in making photographs and the joy of capturing a magical moment cannot be compared. This guide is an introduction to some basic photographic principles. The lens aperture controls not only exposure, but also depth of field;...
  • Page 73 The shutter controls not only exposure, but also the ability to stop motion. Fast shutter speeds are used in sport photography to stop action. Slow shutter speeds can be used to show the flow of motion such as water cas- cading over a waterfall.

  • Page 74: Movie Recording

    OVIE RECORDING MOVIE RECORDING This camera can record up to thirty-five seconds of digital video with sound. The motion JPEG image is 320 X 240 pixels (QVGA). Total recording time with an 16MB memory card is approximately 41 seconds. The digital video recording rate is approximately 340KB per second. Actual memory card capacity depends on the subject and the number of files stored on the card.

  • Page 75: Recording Movies And Audio With The Rc-3 Remote Control (Sold Separately)

    Recording indicator Recording movies and audio with the RC-3 remote control The RC-3 remote control (sold separately) can be used to record movie clips and audio tracks (p. 76) from up to 5m (16ft) away. Simply point the remote control toward the camera and use the release or delay button to start and stop the recording.

  • Page 76: Audio Recording

    UDIO RECORDING AUDIO RECORDING Microphone PressShutterButtonToRecord. Stand-by Recording audio. Press shutter to stop. Recording countdown Audio can be recorded without an image. About 30 minutes of audio can be stored on a 16MB memory card. Audio is recorded at approximately 8KB/s. A maximum of 30 minutes can be recorded at one time Turn the mode dial to the audio-recording posi- tion (1);...

  • Page 77: Playback Mode Viewing And Editing Images

    PLAYBACK MODE VIEWING AND EDITING IMAGES Single-frame playback and histogram display Mode indicator Time of capture Date of capture Audio-track indicator (p. 78) Lock indicator (p. 86) Print indicator (p. 90) Frame number/total number of images The histogram shows the luminance distribution of the recorded image from black (left) to white (right).

  • Page 78: Viewing Images

    LAYBACK MODE Viewing images Simply turn the mode dial to the playback-mode position to access images and audio tracks. Image and audio files can be deleted, locked, and copied in the playback mode. Use the left/right keys of the controller to scroll through the image and audio files on the memory card.

  • Page 79: Playing Back Movies And Audio Recordings

    Playing back movies and audio recordings Movie clips and audio recordings are played back the same way. Use the left/right keys of the con- troller to display the movie or audio file; audio files are displayed with a blue screen. Press the center of the controller to play back a movie or audio file.

  • Page 80: Enlarged Playback

    LAYBACK MODE Enlarged playback In Quick View or in single-frame playback, a still image can be enlarged in six steps for closer exami- nation: 1.5X, 2.0X, 2.5X, 3.0X, 3.5X, 4.0X, 4.5X, and 5.0X. With the image to be magnified displayed, press the up key of the controller to activate the enlarged playback mode.

  • Page 81: Display Button - Playback Mode

    Display button – playback mode The display button controls the display format. Each time the button is pressed, the display cycles through to the next format: full display, image only, index playback. Full display Image only Display button Index playback In index playback, the four-way keys of the controller will move the yellow border.

  • Page 82: Navigating The Playback-Mode Menu

    LAYBACK MODE Navigating the playback-mode menu In playback mode, the menu button turns the menu on and off. The four-way keys of the controller are used to move the cursor in the menu. Pressing the center of the controller will enter a setting. Activate the playback menu with the menu button.
  • Page 83 Basic Delete This frame All frames Marked frames Lock This frame All frames Marked frames Unlock frames Audio caption Enter Custom 1 Slide show Start Duration 1 – 60 sec. Repeat Yes / No Custom 2 Print This frame All frames Marked frames Cancel all Index print...

  • Page 84: Frame-Selection Screen

    LAYBACK MODE Frame-selection screen When a marked-frames setting is chosen on a menu, the frame selection screen will appear. This screen allows multiple images to be chosen. The left/right keys of the controller move the yellow border to select the image. The menu button cancels the screen : sel.

  • Page 85: Deleting Files

    Deleting files Deleting permanently erases the file. Once deleted, a file cannot be recovered. Care should be taken when deleting images. Single, multiple, or all files on the memory card can be deleted in the basic section of the playback- mode menu (p.

  • Page 86: Locking Files

    LAYBACK MODE Locking files Single, multiple, or all files can be locked. A locked file cannot be deleted by either the playback- mode menu functions or the QV/Delete button. Important images and audio recordings should be locked. The lock function is in the basic section of the playback menu (p. 82). The lock option has four settings: This frame –...

  • Page 87: Audio Captioning

    Audio captioning A still image can have a fifteen-second audio caption attached to it. This function will also replace a voice-memo audio track recorded with an image. Audio captions cannot be attached to movie clips, nor can they overwrite audio recordings. Display the image to which the audio caption will be attached.

  • Page 88: Slide Show

    LAYBACK MODE Slide show The custom 1 section of the playback-mode menu controls the slide-show function. This function automatically displays all still images on the memory card in order. Press the central button of the controller to pause and restart the pre- sentation.
  • Page 89 Menu options Settings Slide Enter show All frames Playback Marked Frames Duration 1 – 60s. Repeat Yes/No To start the slide-show presentation. Pressing the central button of the controller will pause the presentation. During the slide show, press the down key of the controller to stop the presentation and return to the playback-mode menu.

  • Page 90: About Dpof

    LAYBACK MODE About DPOF This camera is supported by DPOF™ version 1.1. The DPOF (Digital Print Order Format) allows direct printing of still images from digital cameras. After the DPOF file is created, the memory card is simply taken to a photofinishing service or inserted into the memory-card slot of DPOF compatible printers.

  • Page 91: Ordering An Index Print

    When the this-frame or all-frames setting is chosen, a screen will appear requesting the number of copies of each image; a maximum of nine copies can be ordered. Use the up/down keys of the con- troller to set the number of copies desired. If the all-frames setting was used to create a print order, any additional images saved afterwards in the folder will not be included in the order.

  • Page 92: Copy And E-Mail Copy

    LAYBACK MODE Copy and E-mail Copy The copy function makes exact copies of audio or image files and can store the copied image on another memory card. E-mail Copy makes a standard 640 X 480 (VGA) JPEG copy of the original still image so that it may be easily transmitted by e-mail.
  • Page 93 Copy Copying to camera memory. Change card. Copying to memory card. Copying completed. Enter <101MLTEM> <101MLTCP> The copy-unsuccessful message will appear when one or all of the images could not be copied. Check the second memory card to see which files were copied and then repeat the procedure for the images that were not transferred.

  • Page 94: Viewing Images On A Television

    LAYBACK MODE Viewing images on a television It is possible to view camera images on your television. The camera has a video-out terminal to make the connection using the supplied AV cable. The camera is compatible with the NTSC and PAL stan- dards.

  • Page 95: Setup Mode - Controlling The Camera's Operation

    SETUP MODE CONTROLLING THE CAMERA’S OPERATION The setup mode is used to control the camera’s functions and operation as well as to select image folders. The navigating the setup menu section covers the operation of the menu. The section is fol- lowed by detailed descriptions of the settings.

  • Page 96: Navigating The Setup Menu

    ETUP MODE Navigating the setup menu To access the menu, simply turn the mode dial to the setup position. The four-way keys of the con- troller are used to move the cursor in the menu. The central button of the controller will enter a set- ting.
  • Page 97 Basic LCD brightness Enter Format Enter Power save 1, 3, 5, 10 min. Language Japanese English Deutsch Français Español Custom 1 File # memory Enter Folder name Standard form Date form Audio signals Shutter FX Volume 3 (High) 1 (Low) Custom 2 Reset default Enter...

  • Page 98: Lcd Monitor Brightness

    ETUP MODE LCD monitor brightness High The brightness of the LCD monitor can be set in eleven levels. The brightness setting screen is opened from the basic section of the setup menu (p. 96). Use the left/right keys of the controller (1) to adjust the brightness;...

  • Page 99: Auto Power Save

    Auto Power Save To conserve battery power, the camera will shut down if no operation is made within a certain period. The length of the auto-power-save period can be changed to 1, 3, 5, or 10 minutes. When the cam- era is connected to a computer, the auto-power-save period is fixed at ten minutes.

  • Page 100: Folder Name

    ETUP MODE Folder name All recorded images are stored in folders on the memory card. Folder names come in two formats: standard and date. Standard folders have an eight character name. The initial folder is named 100MLT08. The first three digits are the folder’s serial number, which will increase 100MLT08 by one each time a new folder is created.

  • Page 101: Shutter Fx

    Shutter FX When the shutter is released, a shutter sound effect will give a positive confirmation of the operation. The sound effect can be turn off in the custom 1 section of the setup menu (p. 96). Two shutter effects are available; signal 1 is mechanical and signal 2 is electrical.
  • Page 102 ETUP MODE Metering mode Exposure compensation Camera sensitivity (ISO) White balance AF sensor display Voice memo Date imprinting Instant playback Color mode Sharpness Contrast Color-saturation Date format Duration (Slide Show) Repeat (Slide Show) Index print LCD monitor brightness Auto-power-save period Audio signals Sound FX Volume...

  • Page 103: Setting The Date And Time

    Setting the date and time It is important to accurately set the clock. When a still image or a movie clip is recorded, the date and time of the recording are saved with the image and are displayed during playback or can be read with the DiMAGE Viewer software included on the CD-ROM.

  • Page 104: Data-Transfer Mode Connecting To A Computer

    TRANSFER MODE DATA-TRANSFER MODE CONNECTING TO A COMPUTER Read this section carefully before connecting the camera to a computer. Details on using and installing the DiMAGE Viewer software are found in the supplied software manual. The DiMAGE man- uals do not cover the basic operation of computers or their operating systems; please refer to the manual supplied with your computer.

  • Page 105: System Requirements

    DiMAGE software CD-ROM is required for the opera- tion of the DiMAGE F100 with a computer. The new software will have no affect on the performance of the DiMAGE 7, 5, S304, S404, X, or 2330.

  • Page 106: Connecting The Camera To A Computer

    TRANSFER MODE Connecting the camera to a computer A fully charged battery should be used when the camera is connected to a computer. The use of the AC adapter (sold separately) is recommended over the use of the battery. For users with Windows 98, 98SE, or Mac OS 8.6, read the respective sections on how to install the necessary USB driver before connecting the camera to a computer (Windows 98 –...
  • Page 107 Turn the mode dial to any position to initiate the USB con- nection. • While the camera is connected to a computer, the data- transfer screen will be displayed. When the camera is properly connected, a drive icon will appear on the computer. When using Windows XP, the remov- able-disk window will be displayed.

  • Page 108: Connecting To Windows 98 And 98Se

    TRANSFER MODE Connecting to Windows 98 and 98SE The driver needs only to be installed once. If the driver cannot be installed automatically, it can be installed manually with the operating system’s add-new-hardware wizard; see the instructions on the following page. During installation, if the operating system requests the Windows 98 CD-ROM, inset it into the CD-ROM drive and follow the accompanying instructions on the screen.

  • Page 109: Manual Installation

    Manual Installation To install the Windows 98 driver manually, follow the instructions in the connecting-the-camera-to-a- computer section on page 106. When the camera is plugged into the computer, the operating system will detect the new device and the add-new-hardware-wizard window will open.
  • Page 110 TRANSFER MODE The last window will confirm the driver has been installed. Click “Finish” to close the add new hardware wizard. Restart the computer. The add new hardware wizard will confirm the location of the driver. Click “Next” to install the dri- ver in the system.

  • Page 111: Connecting To Mac Os 8.6

    Connecting to Mac OS 8.6 To access this camera with a computer with Mac OS 8.6, the USB storage support 1.3.5.smi must be installed first. This software is supplied by Apple Computer, Inc. free of charge. It can be downloaded from the Apple Software Updates web site at http://www.apple.com/support.

  • Page 112: Memory Card Folder Organization

    TRANSFER MODE Memory card folder organization Once the camera is connected to the computer, image and audio files can be accessed by double clicking on icons. Image folders are located in the DCIM folder. To copy images and audio recordings, simply drag and drop the file icon into a location in the computer.
  • Page 113 Image and audio file names begin with “PICT” followed by a four-digit file number and a tif, jpg, mov, or thm extension. Voice-memo and audio caption files have a wav extension and the file name corre- sponds to its image file. Audio recordings also use the wav extension. The thumbnail images (thm) are produced with super-fine images and are only used in camera operation.

  • Page 114: Disconnecting The Camera From The Computer

    TRANSFER MODE Disconnecting the camera from the computer Never disconnect the camera when the access lamp is red – the data or memory card may permanently be damaged. Windows 98 and 98SE Confirm that the access lamp is not red. Turn the camera off and then disconnect the USB cable. Windows ME, 2000 professional, and XP To disconnect the camera, left click on the unplug-or-eject-hardware icon located on the task bar.

  • Page 115: Macintosh

    Macintosh Confirm that the access lamp is not lit and then drag the mass-storage device icon and drop it into the trash. Turn the camera off and disconnect the USB cable. • If the USB cable is disconnected before performing the first step, an alert message will appear. Always complete the first step before disconnecting the USB cable.

  • Page 116: Changing The Memory Card (Data-Transfer Mode)

    TRANSFER MODE Changing the memory card (Data-transfer mode) Care should be taken when changing memory cards while the camera is attached to the computer. Data could be lost or damaged if the camera is not properly disconnected. Always confirm the access lamp is not red before removing the memory card.

  • Page 117: Troubleshooting

    ROUBLESHOOTING The section covers minor problems with basic camera operation. For major problems or damage, or if a problem continues to reoccur frequently, contact a Minolta service facility listed on the back cover of this manual. Problem Symptom Nothing dis- The camera played on the will not work.
  • Page 118 ROUBLESHOOTING Problem Symptom Focus signal is red. Pictures are not sharp. Pictures are taken indoors or in low-light situations with- out flash. Continuous advance and bracketing The image quality is set to super fine. drive mode does not work. While using flash, the pic- tures are too dark.

  • Page 119: About Ni-Mh Batteries

    Problem Symptom Shooting data is displayed, Camera set to but live image manual- is entirely exposure black or mode (M). white. If the camera does not function normally, turn it off, remove and reinsert the batteries, or unplug and reconnect the AC adapter. Always turn the camera off using the mode dial otherwise the memory card may be damaged and camera settings reset.

  • Page 120: Removing The Driver Software - Windows

    ROUBLESHOOTING Removing the driver software – Windows 1. Insert a memory card in the camera and connect it to the computer with the USB cable. Other devices must not be connected to the computer during this procedure. 2. Right click on the My-computer icon. Select “properties” from the drop-down menu. Windows XP: from the start menu go to the control panel.

  • Page 121: Care And Storage

    ARE AND STORAGE CAMERA CARE • Do not subject the camera to shock or impact. • Turn off the camera when transporting. • This camera is neither waterproof nor splashproof. Inserting or removing batteries or the memory card, or operating the camera with wet hands may damage the camera. •...

  • Page 122: Operating Temperatures And Conditions

    ARE AND STORAGE OPERATING TEMPERATURES AND CONDITIONS • This camera has been designed for use in temperatures from 0°C to 40°C (32°F to 104°F). • Never leave the camera exposed to extreme high temperatures, such as in a car parked in the sun, or to extreme humidity.

  • Page 123: Lcd Monitor Care

    BATTERIES • Battery performance decreases with temperature. In cold environments, we recommend keeping spare batteries in a warm place, such as the inside of a coat. Batteries can recover their power when they warm up. • Remove the batteries when the camera is not in use for an extended period. Leaking battery fluid may damage the battery-chamber.

  • Page 124: Before Important Events Or Journeys

    ARE AND STORAGE COPYRIGHT • TV program, films, video tapes, photographs, and other materials may be copyrighted. Unauthorized recording or duplication of such material may be contrary to copyright laws. Taking pictures or images of performances, exhibitions, etc., is prohibited without approval and can infringe on copyright.
  • Page 125 This mark on your camera certifies that this camera meets the requirements of the EU (European Union) concerning interference causing equipment regula- tions. CE stands for Conformité Européenne (European Conformity). Digital Camera: Tested To Comply With FCC Standards FOR HOME OR OFFICE USE This Class B digital apparatus complies with Canadian ICES-003.

  • Page 126: Technical Specifications

    ECHNICAL SPECIFICATIONS Number of effective pixels: CCD: Camera sensitivity (ISO): Aspect ratio: Lens construction: Maximum aperture: Focal length: Focusing range (from the CCD): 0.5 m - ∞ / 1.6 ft - ∞ Autofocusing system: Shutter: Shutter speeds: Built-in flash recycling time: Viewfinder: Monitor LCD: Monitor field of view:...
  • Page 127 Batteries: External power source: Dimensions: Weight: Operating temperature: Operating humidity: Specifications are based on the latest information available at the time of printing and are subject to change without notice. One CR-3V lithium battery or two AA Ni-MH batter- ies. AC-6 adapter 111.0 (W) X 52.3 (H) X 32.0 (D) mm 4.4 (W) X 2.1 (H) X 1.3 (D) in...
  • Page 128 © 2002 Minolta Co., Ltd. under the Berne Convention and the Universal Copyright Convention. 9222-2777-11 HA-A204...

This manual is also suitable for:

Dimage f100 - v2

Table of Contents