2000-Sheet Dual Input (Ttm)-One-Way Clutch / Gear Assembly Removal - Lexmark X940e Service Manual

7510
2000-sheet dual input (TTM)—one-way clutch / gear assembly removal
1. Remove the tray module left cover. See
page 4-167.
2. Remove the TTM media tray 3 assembly. See
removal" on page
3. Remove the TTM media tray 4 assembly. See
removal" on page
4. Remove the tray 4 media transport assembly. See
assembly removal" on page
5. Remove the media feed unit assembly. See
removal" on page
page 4-183, or
6. Remove the harness from the bracket (A).
7. Remove the three screws securing the bracket (A) to the media feed unit assembly.
8. Remove the bracket (A).
Note: The gears may become detached from the bracket (A).
9. Remove the tray lift one-way clutch (B).
4-188
Service Manual
"2000-sheet dual input (TTM)– tray module left cover removal" on
4-171.
4-170.
4-175.
4-183, "2000-sheet dual input (TTM)–media feed unit assembly removal (tray 3)" on
"2000-sheet dual input (TTM)–media feed unit assembly removal (tray 4)" on page
Harness
Clamp
A
Rear
"2000-sheet dual input (TTM)–TTM media tray 3 assembly
"2000-sheet dual input (TTM)–TTM media tray 4 assembly
"2000-sheet dual input (TTM)–TTM tray 4 media transport
"2000-sheet dual input (TTM)–media feed unit assembly 2
Washer
B
4-179.