Konica Minolta bizhub C650 User Manual page 79

Administrator mode
Status Notification Setting page
Item
Notification Address
Replenish Paper Tray
JAM
PM Call
Replace Staples
Replenish Toner
Finisher Tray Full
Service Call
Job Finished
Hole-Punch Scrap Box Full
Waste Toner Box Full
Imaging Unit Yield
Fusing Unit Yield
Transfer Roller Yield
Transfer Belt Unit Yield
Ozone Filter Yield
If the notification destination is specified as an IP address, specify the port number and community name.
Before typing in a host name, check the "Please check to enter host name." check box.
If the notification destination is specified as an IPX address, specify the node address and community name.
!
Detail
The information that appears as "the printer location" in the e-mail message sent with the status
notification function is specified in the "Printer Location" box on the page displayed by clicking "IPP
Setting" in the menu on the Network tab. For details on "Printer Location", refer to "IPP Setting" on
page 3-65.
C650
Description
Type in the notification address.
Notifies when the paper tray runs out of paper.
Notifies when a paper misfeed occurs.
Notifies when a periodic inspection should be performed.
Notifies when there are no more staples.
Notifies when there is no toner.
Notifies when the finisher tray capacity has been reached.
Notifies when there is a service call.
Notifies when the job is completed (successfully).
Notifies when the punch scraps must be removed.
Notifies when the waste toner box must be replaced.
Notifies when the imaging unit must be replaced.
Notifies when the fusing unit must be replaced.
Notifies when the transfer roller unit must be replaced.
Notifies when the image transfer belt unit must be replaced.
Notifies when the ozone filter must be replaced.
3
3-5