Konica Minolta bizhub C650 User Manual page 65

User mode
Item
Compose (Stamp)
Stamp Combine Method
Limiting Access to Destinations
If "Fax" was selected
Item
No.
Name
Destination Information
Resolution
File Type
Simplex/Duplex
Original Type
Separate Scan
Density
Background Removal
Scan Size
Application Setting
Timer TX
Password TX
F-Code
2-Sided Binding Direction
Special Original
Book Scan
Erase
C650
Description
Specify whether to print the stamp.
To specify this item, specify settings for the following.
• Preset Stamp or Registered Stamp
• Print Position
• Fine-Tune (for making fine adjustments to the print position)
• Color
• Pages
• Size
To check a registered stamp, click the [Confirm Registed Contents] button. A
registered stamp must first be registered from the control panel.
Select "Image" or "Text".
To specify the access level of the destination, click the [Display] button. If an
access permission group is specified for the user who is logged on, the set-
tings for "Search from Reference Allowed Group" appear.
If "Search from Reference Allowed Group" is selected, click the [Search from
List] button, and then select an access permission group from the list. If "Set
direct Reference Allowed Level" is selected, select a level.
Description
Displays the registration number.
Type in the name of the program (up to 24 characters).
Specify the destination.
Select "Select from Address Book" or "Direct Input". To select a destination
from the address book, click the [Search from List] button, and then select from
the list of address book destinations. An address book destination can also be
searched for using its number or index characters. To check the transmission
destinations, click the [Check Destination] button.
If "Direct Input" is selected, type in the address (up to 38 characters, including
only numerals, #, *, T, P and E). Click the [Display] button beside "Communica-
tion Setting", and then select the communication setting ("V34 Off", "ECM Off",
"International Communication", "Check Destination"). If the optional fax multi
line is installed, the line can be selected.
Select the resolution.
Select the file format.
Select "1-Sided", "2-Sided" or "Cover Sheet + 2-Sided".
Select the document quality, such as text or photo.
Select either "ON" or "OFF".
Select the density.
Adjust the density of the background.
Select the document size ("Auto", "Standard Size" or "Custom Size").
If "Standard Size" is selected, select the size and the feed direction.
If "Custom Size" is selected, specify the height and width.
Click the [Display] button, and then specify settings for the functions that are
displayed.
Select whether or not to enable timer transmission. If "ON" is selected, specify
the time.
Select whether or not to enable password transmission. If "ON" is selected,
specify the password.
Select whether or not to enable F-codes. If "Enable" is selected, type in the
SUB address and password.
Select the position of the document binding margin.
Select "Normal", "Mixed Original", "Z-Folded Original" or "Long Original" as
the setting for the loaded document.
Specify whether to perform book scan.
To specify this item, select settings for the scanning method and center eras-
ing. If any setting other than "Book Spread" is selected for the scanning meth-
od, select the binding direction.
Specify whether to perform frame erase.
To specify this item, specify the width that is erased on all sides of the docu-
ment ("Top", "Bottom", "Left" and "Right").
2
2-41