Smb Setting - Direct Hosting Setting - Konica Minolta bizhub C650 User Manual

Administrator mode
Item
SMB Print
NetBIOS Name
Print Service Name
*
Workgroup
Reminder
In order to apply the changes to the settings for "NetBIOS Name", "Print Service Name", and
"Workgroup", restart the machine (turn it off, then on again).
When the machine is turned off, then on again, turn the machine off with the [Power] (auxiliary power)
key before turning off the main power switch. In addition, wait at least 10 seconds to turn the machine
on after turning it off; otherwise, the machine may not operate correctly.

SMB Setting - Direct Hosting Setting

Specify the settings for direct hosting services.
Item
Direct Hosting Setting
Reminder
To specify a destination computer using the computer name in the IPv6 environment, the Direct Hosting
setting must be enabled. To enable the Direct Hosting setting, prepare a DNS server and be sure to
specify the DNS settings of this machine correctly. For details on specifying the DNS server settings,
refer to "TCP/IP Setting - TCP/IP Setting" on page 3-53.
C650
Description
Select whether or not the SMB printing (Windows printing) service is used.
*
Type the NetBIOS name in uppercase letters (up to 15 characters, including only -).
*
Type the name of the print service in uppercase letters (up to 12 characters, exclud-
ing / and \).
Type the name of the workgroup in uppercase letters (up to 15 characters, exclud-
ing " \ ; : , * < > | + = and ?).
Description
To use the direct hosting service, select "ON".
To communicate with the destination using an IPv6 address, select "ON".
3
3-70