Saving Scans In Boxes; Using A Box Destination - Konica Minolta BIZHUB bizhub C300 User Manual

Saving documents
2.3

Saving scans in boxes

Scanned images can be saved in boxes. Box destinations can be registered
in the address book, or a box destination can be specified directly.
The following procedure describes how to specify a box as a destination and
how to use the Direct Input tab.
Note
If optional image controller IC-406 is installed, scan documents cannot
be saved in boxes on this machine.

Using a box destination

A destination where a box has been registered is called a "box destination".
Box destinations are saved on the Address Book tab and are indicated by
"B" on their buttons.
The following procedure describes how to save data to a specified box des-
tination that has already been registered.
Note
If a box destination is used, the document is automatically saved with the
default name.
To specify whether or not the marks indicating the destination type are
displayed, touch [2 User Setting] in the Utility screen, then [2 Display Set-
ting], then [2 Scan Basic Screen Default Setting], and then specify a set-
ting for the "Address Type Symbol Display" parameter. For details, refer
to User's Guide [Copy Operations].
C300
2
2-9