Table of Contents
Advertisement
4.4
LOGO PLACEMENT
With the control door closed, affix the logo to the front face of the
control door at the bottom left corner.
SLOT
4.5
GLASS MEDIA INSTALLATION
(REAR VIEW)
CLEAN THE GLASS EMBERS PRIOR TO INSTALLATION. BEFORE APPLYING THE CLEANED GLASS, ENSURE
DO NOT CHANGE OR SUBSTITUTE THE GLASS EMBER MATERIAL PROVIDED WITH THIS APPLIANCE. IF
REPLACING, USE ONLY THE REPLACEMENT GLASS EMBERS AVAILABLE FROM YOUR AUTHORIZED
Evenly spread the glass media onto the media tray, ensuring no glass media falls onto the burner. If this hap-
pens, insert a clean bag into your vacuum cleaner and vacuum out the glass media. Replacement glass can
be purchased from your local authorized dealer / distributor.
CLEANING GLASS MEDIA
Glass media may have a fi ne oil residue that needs to be cleaned prior to installation. Clean the glass with mild
dish soap, drain, rinse thoroughly and dry before placing over the burner.
CLEANING CRYSTALS
To help maintain the luster and beauty of these crystals over time, carefully polish them by using a soft, lint-
free cloth. If they become heavily soiled, you may use a mild detergent and wash them individually by hand, as
you would a fi ne chandelier. Please avoid rubbing the crystals together. Do not use a dishwasher.
FRAME
(APPROX.)
TRIM
BRACKET
WARNING
!
THAT IT IS DRY.
DEALER / DISTRIBUTOR.
BURNER
RECEIVING
CONTROL
1/4"
1/4"
(APPROX.)
74.2
17
SLOTS
DOOR
GLASS
MEDIA
MEDIA
TRAY
W415-0847 / 09.15.09
Advertisement
Table of Contents
