Konica Minolta BIZHUB 162 User Manual page 230

8
Message
PC PRINT
MEMORY FULL
SET PLUG-IN COUNTER
UPPER TRAY FULL
(Flashing alternately)
REMOVE PAPER
TRAY MOVEMENT ERROR
(Flashing alternately)
PRESS ANY KEY
CALL SERVICE(M1)
CALL SERVICE(M2)
MACHINE TROUBLE
(Flashing alternately)
(C####)
8-20
Cause
The image data received from
the computer has exceeded
the capacity of the memory.
A counter key is not inserted.
If the optional job separator is
installed and the paper in the
upper copy tray has reached
the maximum capacity, print-
ing cannot continue.
The optional job separator is
installed and the paper in ei-
ther the upper copy tray or the
lower copy tray has reached
the maximum capacity when
the machine is turned on,
when copying begins, or when
starting to print.
A maintenance is due.
The imaging unit should be re-
placed.
Some problem occurred in the
machine.
When a message appears
Remedy
Press any key, or turn the ma-
chine off, then on again. (The
received image data should be
cleared from the memory.)
Insert the counter key.
Remove all paper from the up-
per copy tray of the job sepa-
rator.
Remove the paper from the
upper copy tray or the lower
copy tray of the job separator,
and then press any key.
Contact your service repre-
sentative.
Contact your service repre-
sentative.
Turn the machine off, then on
again.
If the error is still displayed,
contact your service repre-
sentative.
bizhub 162/210