Programmed Copy Jobs; To Store A Copy Program - Konica Minolta BIZHUB 162 User Manual

6
6.7

Programmed copy jobs

Store up to two of the more frequently used copy setting programs for im-
mediate recall when necessary.
Note
Copy programs cannot be stored while the machine is warming up or
while a copy job is paused (Interrupt mode).

To store a copy program

1
Specify the desired copy settings.
For details, refer to "Making a basic copy" on page 4-3.
– The zoom ratio can be set between × 0.50 and × 2.00.
2
Press the [Copy program] key.
3
Press the [*] and [)] keys to select
REGIST..
4
Press the [Yes] key.
5
Using the [*] and [)] keys, select the
program number where you wish to
store the copy program.
6
Press the [Yes] key.
This will start the copy cycle.
Note
If two copy programs have already been stored, the copy settings previ-
ously stored under the selected program number are deleted and re-
placed with the new ones.
6-22
Advanced copy operations
bizhub 162/210