Advertisement
Removal of Fan Motor
2. Removal of Fan Motor
Procedure
Step
1
Disconnect the
connector for fan motor
[S70] and release the
ferrite core attached to
the electrical box with
clamp.
The illustration shows
2
arrangement of the fan
motor lead wire.
3
Cut the clamps at 2
locations.
12
Warning
Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
[S70]
Fan motor lead wire
When reassembling, insert
the clamp into the small
Ferrite core
hole.
(R11082)
Fix the ferrite core at where
the tension does not pull the
PCB ASSY when connecting
the connectors.
(R11084)
(R9630)
Si12-996
Points
Removal Procedure
Advertisement
