Icom IC-92A Instruction Manual page 13

➥ " S" appears with the "DSQL" or "CSQL" indicator
while the pocket beep function
is in use. (p. 111)
digital code squelch)
t KEY LOCK INDICATOR (pgs. 25, 113)
Appears when the key lock function is activated.
y AUTO POWER OFF INDICATOR (p. 88)
Appears when the auto power OFF function is in use.
u EMR MODE INDICATOR (p. 56)
Appears when the EMR mode operation is selected.
i FREQUENCY READOUT
Displays a variety of information, such as operating fre-
quency, set mode contents, memory names.
• The decimal point blinks during scan.
o SKIP INDICATORS (pgs. 79, 80)
➥ " SKIP" appears when the selected memory channel is
set as a skip channel.
➥ " P-SKIP" appears when the displayed frequency is set
as a skip frequency.
!0 MEMORY CHANNEL NUMBER INDICATOR
➥ Shows the selected memory channel number. (pgs. 64,
65)
➥ "C" appears when the call channel is selected. (pgs. 16,
65)
➥ "WX" appears when the weather channel is selected.
(pgs. 16, 114)
➥ "TV" appears when the TV channel is selected.
(pgs. 16, 28)
!1 S/RF METER
(with digital call sign or
!2 ATTENUATOR INDICATOR (p. 22)
!3 LOW POWER INDICATOR (p. 24)
!4 MEMORY INDICATOR (p. 64)
!5 NAME INDICATOR (p. 70)
!6 MAIN BAND INDICATOR (p. 14)
!7 OPERATING MODE INDICATOR (p. 21)
!8 SIMPLE BAND SCOPE INDICATOR (p. 23)
PANEL DESCRIPTION
➥ Shows the relative signal strength while receiving sig-
nals.
➥ Shows the output power level while transmitting. (p. 24)
Appears when the RF attenuator is in use.
➥ " LOW" appears when low power is selected.
➥ No indicator appears when high power is selected.
Appears when memory mode is selected.
During memory mode operation, the programmed mem-
ory or memory bank name is displayed.
Shows which operating band, "A" or "B," is selected for the
main band.
Shows the selected operating mode.
• DV, FM, FM-N, WFM and AM are available, depending on oper-
ating band.
When the simple band scope function is in use, shows
the band conditions.
2
2
7