Replacing The Battery; Procedure; Post-Requisites - Dell Alienware 17 R2 Service Manual

Replacing the battery

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.

Procedure

1 Align the screw holes on the battery with the screw holes on the
computer base.
2 Replace the screws that secure the battery to the computer base.
3 Slide the battery cable through the slot on the computer base.
4 Adhere the front AlienFX LED cable to the battery.
5 Route the speaker cable through the routing guides on the battery.
6 Connect the speaker cable and front AlienFX LED cable to the system
board.

Post-requisites

1 Follow the procedure from step 5 to step 11 in "Replacing the
2 Replace the base
Computer. After working inside your
panel.
After Working Inside Your
palm rest".
65