Replacing The Display Hinges; Procedure; Post-Requisites - Dell Alienware 17 R2 Service Manual

Replacing the display hinges

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.

Procedure

NOTE: This chapter is applicable only if you have purchased a laptop
with non-touchscreen display.
1 Align the screw holes on the display hinges with the screw holes on the
display back-cover.
2 Replace the screws that secure the display hinges to the display back-
cover.
3 Align the screw holes on the hinge caps with the screw holes on the
display hinges.
4 Replace the screws that secure the hinge caps to the display hinges.

Post-requisites

1 Replace the
2 Replace the
3 Follow the procedure from step 5 to step 11 in "Replacing the
4 Replace the
5 Replace the
112
display bezel.
display assembly.
wireless card.
base panel.
Computer. After working inside your
After Working Inside Your
palm rest".