Removing the status-light
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1
Remove the
2
Follow the procedure from step 1 to step 9 in "Removing the
Procedure
1
Lift the latch and disconnect the status-light board cable from the status-
light board.
2
Remove the screws that secure the status-light board to the palm-rest
assembly.
base
panel.
Computer. After working inside your
After Working Inside Your
palm
rest".
45