Replacing The Touch Pad; Procedure; Post-Requisites - Dell Alienware 17 R2 Service Manual

Replacing the touch pad

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.

Procedure

1 Using the alignment posts on the palm-rest assembly, place the touch
pad on the palm-rest assembly.
2 Slide the touch-pad button cable into the touch-pad button connector
and press down the latch to secure the cable.
3 Align the screw holes on the touch-pad button bracket with the screw
holes on the palm-rest assembly.
4 Replace the screws that secure the touch-pad button bracket to the
palm-rest assembly.
5 Slide the touch-pad cable into the touch-pad connector and press down
the latch to secure the cable.

Post-requisites

1 Follow the procedure from step 5 to step 11 in "Replacing the
2 Replace the base
56
Computer. After working inside your
panel.
After Working Inside Your
palm rest".