Switching On And Off; Maintenance - Stanley STEL505 Original Instructions Manual

ENGLISH

Switching on and off

To switch the tool on, press the variable speed switch (1).
‹
The tool speed depends on how far you press the switch.
As a general rule, use low speeds for large diameter drill
‹
bits and high speeds for smaller diameter drill bits.
For continuous operation, press the lock-on button (2) and
‹
release the variable speed switch. This option is available
only in forward (clockwise) rotation.
To switch the tool off, release the variable speed switch.
‹
To switch the tool off when in continuous operation, press
the variable speed switch once more and release it.
Accessories
The performance of your tool depends on the accessory used.
Stanley accessories are engineered to high quality standards
and designed to enhance the performance of your tool. By us-
ing these accessories you will get the very best from your tool.

Maintenance

Your Stanley corded/cordless appliance/tool has been
designed to operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation depends
upon proper tool care and regular cleaning.
Warning! Before performing any maintenance on corded/
cordless power tools:
Switch off and unplug the appliance/tool.
‹
Or switch off and remove the battery from the appliance/
‹
tool if the appliance/tool has a separate battery pack.
Or run the battery down completely if it is integral and then
‹
switch off.
Unplug the charger before cleaning it. Your charger does
‹
not require any maintenance apart from regular cleaning.
Regularly clean the ventilation slots in your appliance/tool/
‹
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
‹
not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any dust
‹
from the interior (when fitted).
6
(Original instructions)