(Original instructions) ENGLISH Intended use Your STANLEY FATMAX SFMCH900 rotary hammer has been designed for drilling masonry and light chiselling, can also be used for drilling in wood, metal and plastics with SDS adapter (not supplied). This tool is intended for professional and private, non professional users.
Page 4
ENGLISH (Original instructions) The term “power tool” in all of the warnings listed below refers c. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source to your mains operated (corded) power tool or battery and/or battery pack, picking up or carrying the tool.
(Original instructions) ENGLISH g. Use the power tool, accessories and tool bits etc. in Safety Instructions for All Operations accordance with these instructions, taking into ● Wear ear protectors when impact drilling. Exposure to account the working conditions and the work to noise can cause hearing loss.
ENGLISH (Original instructions) Residual risks Warning! To reduce the risk of injury, the user must read the instruction manual. Additional residual risks may arise when using the tool which may not be included in the enclosed safety warnings. Wear ear protectors with rotary hammer drills. These risks can arise from misuse, prolonged use etc.
Page 7
Green LED Intermittent rating plate. If the supply cord is damaged, it must be replaced by the manufacturer or an authorised STANLEY FATMAX Service Fully Charged: Centre in order to avoid a hazard. Green LED Solid...
Warning! Since accessories, other than those offered by the slots. STANLEY FATMAX, have not been tested with this product, Pull on the accessory to check if it is properly locked. The use of such accessories with this tool could be hazardous. To...
No-load beats 0 - 5500 0 - 5500 0 -5500 per minute 2014/30/EU and 2011/65/EU. For more information, please contact STANLEY FATMAX at the following address or refer to Single impact energy (EPTA the back of the manual. 05/2009) Weight The undersigned is responsible for compilation of the techni- Max.
Page 12
Australia & New Zealand Stanley Black & Decker Stanley Fat Max www.stanleytools.com.au Tel.1800 338 002 (Aust) or Tel. 0800 339 258 (NZ) 810 Whitehorse Road Box Hill VIC 3128, Australia N820923 03/2020...