Briggs & Stratton Generator System Installation & Start-Up Manual page 30

Advanced Settings Screen
Advanced setting parameters are preset at the factory for a typical installation. To view Advanced Settings items and/or to
change items, follow the instructions listed below.
NOTICE Advanced settings are critical to the operation of the unit. Careful consideration should be taken when working
in the Advanced Settings menu. Exercise caution when selecting and verifying parameters for the generator and region
where the generator is being operated. Confirm all settings before operating the generator for the first time.
For advanced menu items, press and hold the left arrow, right arrow, and escape key
the prompts as outlined below.
NOTICE In the Advanced Setting menu, a three button access code (left arrow, right arrow, and escape key
must be pressed once to enter the menu and again to change any setting. After each confirmation of a setting, the selection
will display solid for 2 seconds before moving to the next program item.
kW
Hz
PHASE
VOLTS
or
Not applicable
E-Governor
with these models
Check
or
SOFTWARE
Version Displayed
30
or
or
or
FLASHING
will sweep through throttle
kW
FLASHING
or
50/60 Hz
FLASHING
or
SINGLE
or
THREE
FLASHING
or
VOLTS
or
Stepper Motor
range for dealer
visual veri cation
or
for 3 seconds. Follow