--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

[1] Error Rate...1.105E-4

[3] Track Jump+

[4] Track Jump-

[5] Focus Jump

[6] ID Search

[7] Tracking Open (to Focus Close)

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

F.Bal(0) : 0000 0000

F.Gain(0) : 0000 0000

F.Bal(1) : 0000 0000

F.Gain(1) : 0000 0000

T.Gain(0) : 0000 0000

T.Gain(1) : 0000 0000

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Press [OK] to make a selection

Press [BACK] - DVD-1

Test items are basically the same for both DVDs and CDs.

Status : "Tracking Close (during normal conditions)."

[1]

[OK] triggers measurement of the error rates (other operations can not be performed for

approximately 10 seconds.

[2]

[OK] triggers switching of the reproduction speed.

[3]

Performs track jumping by a designated number of tracks (external).

[4]

Performs track jumping by a designated number of tracks (internal).

[5]

Performs a focus jump operation (for DVDs only).

[6]

Designates an ID (for DVDs only).

[7]

Performs a tracking open operation (for the focus close status : will proceed to servo test 2-0).

[BACK]

Returns to the DVD test menu screen display.

* This operation will not be performed until the coefficient figures have been received.

Reproduction speeds

L0-layer

DVD x 1.3CLV, CD x 2

L0-layer

DVD x 1CLV

L1-layer

DVD x 1.3CLV

L1-layer

DVD x 1CLV

[ X-3016 DVD Servo. Test(4-3) ]

[X-3016 DVD Servo.Test(4-3)]

Status :Tracking Closed

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

[1] Track appointment

[2] Start Track Jump+/-

Press [OK] to make a selection

Press [BACK] to Back

Test items are basically the same for both DVDs and CDs.

Status : "Tracking Close (during normal conditions)."

[1]

Performs a track number designation (MS3 cyclically switches the available patterns).

[2]

Starts the tracking jump operation (will proceed to servo test 4-0).

Data : 4000 0000

[2] Read Speed: x1.3 CLV