Pioneer AVIC-N2 Service Manual page 244

1
[ X-3016 FE Test menu ]
[X-3016 FE Test menu]
A
Status : Power Off
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
[1] Power On
[2] Disc tipe : DVD 1-Layer
[3] Disc tipe : DVD 2-Layer
[4] Disc tipe : CD
[5] Disc tipe : CD-RW
[6] Disc Eject
Press [OK] to make a selection
B
Press [BACK] - Test top(Power Off)
Status : "Power Off (during normal conditions)."
[1] Power On (proceed to servo test 1-0).
[2] Disc type : DVD single-layer.
[3] Disc type : DVD double-layer.
[4] Disc type : CD.
[5] Disc type : CD-RW.
[6] Ejects the Disc.
[OK] Executes.
C
[BACK] Returns to the initial screen display for the test.
[ X-3016 DVD Test ]
[X-3016 DVD Test] EDC-1
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Layer : 0
ID : 20 03 0A 63
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
[1] Select Layer 0
D
[2] Select Layer 1
[3] Disc Eject
Press [OK] to make a selection
Press [BACK] to DVD Test top(EDC end)
EDC-1 : Performs consecutive EDC tests.
EDC-2 : Performs EDC tests for each block.
ID : Performs ID of the test.
E
[1] Select layer 0.
[2] Select layer 1.
[3] Ejects the Disc.
[OK]
Executes.
[BACK] Returns to the test mode menu.
F
244
1
2
Data : 0000 0000
AVIC-N2/XU/UC
2
3
3
4
4