Pioneer AVIC-N2 Service Manual page 238

1
2. When detailed information does not exist:
A
B
C
3. Error Information Switch
The product (with default settings) will display error messages to the user if an error occurs.
Error information can be displayed if an error occurs by switching the error information in the test mode.
In either case, the error log entry display will be the same.
D
1) Error message display (default settings):
• Setting in the test mode:
E
F
238
1
2
ERROR INFORMATION
**
type = 000000b7(183)
ercd = ffffc002(-16382)
inf = ffb7ac18(-4740072)
ERROR-TIME ffff-ff-ff ff:ff:ff
No.2 ERROR No.1
Stop when push [BACK] button.
type Error occurring program line number.
ercd Error code.
inf System down information.
ERROR-TIME Error occurrence date and time.
If an error occurs due to a multiple exception, the definitions will change to the following:
type Execution address at the time of error occurrence.
ercd Contributing factor for the exceptions.
inf Program status word at the time of error occurrence.
ERROR-TIME Error occurrence date and time.
TESTMODE MENU [SERVICE_MENU(TECHNICAL)]
1. Change to display error [Message]
2. Start within debug shell [On]
3. Program loading
4. GPS assessment
5. File maintenance
6. Program forced write
<== back page
SYSTEM Ver. : [BOOT]0.65 [OS]0.65
AVIC-N2/XU/UC
2
3
**
No.24
[Disc version]
==> next page
3
4
4