Pioneer AVIC-N2 Service Manual page 235

5
7. Check Touch-panel navi coordinate
[BACK] + pressing the touch panel will make the system return to the remote controller inspection menu.
Explanation of the displayed content.
panel x_before : X coordinate normalized (expanded) within the effective range.
panel y_before : Y coordinate normalized (expanded) within the effective range.
panel x_after : X coordinate obtained by adding the correction based on calibration.
panel y_after : Y coordinate obtained by adding the correction based on calibration.
5
6
### Remocon test
panel x_before = 35
panel y_before = 55
panel x_after
panel y_after
return to amenu by [DEST] and [TOUCH-PANEL]
AVIC-N2/XU/UC
6
7
###
= 28
= 53
7
8
A
B
C
D
E
F
235
8