Installer Confi Guration Menu - White Rodgers 1F95-1291 Installation And Operating Instructions Manual

INSTALLER/CONFIGURATION MENU
To enter the menu: Press the Menu touch key. Press and hold for 5 seconds the Installer Confi g touch key. This displays
menu item #1 in the table below. Press
or to change a menu item.
Menu Program- Non-
Reference mable Program-
Number mable
1 1 1
2 2 2
3 3 3
4 4 3
5 5 NA
6 6 4
7 7 NA
8 8 5
9 9 6
10 10 7
11 11 8
12 12 9
13 13 10
14 14 11
15 15 12
16 16 13
17 17 14
18 18 15
19 19 16
20 20 17
21 21 18
22 22 19
23 23 20
24 24 21
25 25 22
26 26 23
27 27 24
28 28 25
5
to advance to the next menu item or
CONFIGURATION MENU
Press Displayed
Press
Button Factory
to select from
(Default)
listed options
MS 2 HP 1, HP 2, SS 1
GAS
ob (O)
Days, (7) P
PS (4)
Cool-Off- Cool-Off-Heat, Heat Off,
Heat-Auto Heat, Coof-Off, Auto Off
Cool-Off-Heat- Cool-Off-Heat-Emer,
Emer-Auto Off-Emer-Auto
E (On)
Cr, Heat (FA)
Cr, Cool (FA)
Cr/AU, Emer (FA)
CL (OFF)
dL (On)
dL (LO)
0 5, LO to 5, HI
(Temperature)
°F
b (On)
dS (On)
AS, Heat (On)
AS, Cool (On)
CS, (OFF) 1-2-3-4-5-6
Cool Savings
HL, Heat (99)
LL, Cool (45)
L (total), P (partial),
OFF,
Temperature Limit
Keypad Lockout
(limited temperature range)
000
FS, Heat (On)
FS, Cool (On)
Remote (OFF)
In, Remote Outdoor Remote
LS (On)
dF (OFF)
dF (05)
Cd (60)
dF (OFF)
to return to a previous menu item. Press
Comments
or
Selects Multi-Stage (MS2, No Heat Pump), Heat Pump 1
(HP1, 1 compressor), Heat Pump 2 (HP2, 2 compressor
or 2 speed compressor), or Single Stage.
(ELE) GAS setting: furnace controls blower.
ELE setting: thermostat controls blower.
b Selects Reversing Valve (This item is only to appear if HP1 or HP2 is
selected above.)
5 or 0 Programs per week. (5=5-1-1 or 0 = non-programmable)
2 Programs per day.
4 = Morning, Day, Evening, Night
2 = Day, Night
System switch confi guration in non heat pump mode.
System switch confi guration, heat pump mode.
OFF Selects Energy Management Recovery, E (with programming option
on)
SL Selects Adjustable Anticipation, cycle rate, Heat
SL Selects Adjustable Anticipation, cycle rate, Cool
SL Selects Adjustable Anticipation, cycle rate auxiliary, (This item is
only to appear if HP1 or HP2 is selected above).
On Selects Compressor Lockout.
OFF Selects Continuous Display backlight.
HI Selects Backlight Intensity.
Selects Adjustable Ambient Temperature Display [range -5 (LO) to
+5 (HI)].
°C Selects °F/°C Display (temperature units in Fahrenheit or Celsius).
OFF Selects audible Beeper On/Off.
OFF Selects Daylight Saving Time calculation.
OFF Selects Automatic Schedule for comfort temperature Programming,
heat mode.
OFF Selects Automatic Schedule for comfort temperature Programming,
cool mode.
Selects Cool Saving Feature & amount.
62-98 TEMPERATURE LIMIT, HEAT (max. heat set point).
46-82 TEMPERATURE LIMIT, COOL (min. cool set point).
Selects Keypad Lockout.
001-999 Selects Keypad Lockout Combination (active only if keypad Lockout
is selected).
OFF Fast second stage of heat (not available if SS1 is selected above).
OFF Fast second stage of cool (not available if SS1 or HP1 is selected
above).
On Remote temperature sensor, enable/disable.
Remote temperature sensor (Indoor/Outdoor).
OFF Local temp. Sensor enable/disable (only when Indoor Remote is
selected On).
On Selects Dual Fuel feature using software logic On or OFF (This item
appears if HP1 or HP2 is selected above and no outdoor sensor.
0-09 Selects Dual Fuel setpoint (°F) with no outdoor sensor.
0-99 Selects compressor delay in seconds.
On Selects Dual Fuel feature using outdoor sensor On or OFF (This item
appears if HP1 or HP2 is selected and outdoor sensor is installed and
enabled.