Installer Configuration Menu - White Rodgers 90 Series Installation And Operating Instructions Manual

INSTALLER/CONFIGURATION MENU
To enter the menu: Press the Menu touch key. Press and hold for 5 seconds the Installer Config touch key. This displays
menu item #1 in the table below. Press
or to change a menu item.
Menu Non-
Reference Program- Program- Press
Number mable mable
1 1
1
2 2
2
3 3 NA
4 4 3
5 NA
5
6 6 4
7 7 5
8 8 6
9 9 7
10 8
10
11 9
11
12 12 10
13 13 11
14 14 12
15 13
15
16 16 14
17 17 15
18 16
18
19 17
19
20 20 18
21 19
21
22 22 20
to advance to the next menu item or
CONFIGURATION MENU
Displayed Press
(Factory to select from
Button Default) listed options
(ELE)
Days, (7) P 5-1-1 or 0
PS (4)
Cool-Off- Cool-Off-Heat,
Heat-Auto Off-Heat, Cool-Off
E (On)
Cr, Heat (FA)
Cr, Cool (FA)
CL (OFF)
dL (On)
dL (LO)
0 4, LO to 4, HI
°F
b (On)
dS (On)
AS, Heat (On)
AS, Cool (On)
CS, (OFF) 1-2-3-4-5-6
Cool Savings
HL, Heat (99)
LL, Cool (45)
OFF , L (total), P (partial),
Keypad Lockout Temperature Limit
(limited temperature range)
000
Remote (OFF)
In, Remote Outdoor Remote
LS (On)
Change Filter
(OFF)
200 Hours 25-1975 (in increments Change filter, duration hours.
of 25 hours)
to return to a previous menu item. Press
or
Comments
GAS GAS setting: furnace controls blower.
ELE setting: thermostat controls blower.
Programs per week. (0 = non-programmable)
2 Program periods per day.
4 = Morning, Day, Evening, Night
2 = Day, Night
System switch configuration.
OFF Selects Energy Management Recovery, E (with programming option on)
SL Selects Adjustable Anticipation, cycle rate, Heat
SL Selects Adjustable Anticipation, cycle rate, Cool
On Selects Compressor Lockout.
OFF Selects Continuous Display backlight & intensity.
HI Selects Backlight Intensity.
Selects Adjustable Ambient Temperature Display [range -4 (LO) to
+4 (HI)].
°C Selects °F/°C Display (temperature units in Fahrenheit or Celsius).
OFF Selects audible Beeper On/Off.
OFF Selects Daylight Saving Time calculation.
OFF Selects Automatic Schedule for comfort temperature Programming,
heat mode.
OFF Selects Automatic Schedule for comfort temperature Programming,
cool mode.
Selects Cool Saving Feature & amount.
62-98 TEMPERATURE LIMIT, HEAT (max. heat set point).
46-82 TEMPERATURE LIMIT, COOL (min. cool set point).
Selects Keypad Lockout.
001-999 Selects Keypad Lockout Combination (active only if keypad Lockout
is selected).
On Remote temperature sensor, enable/disable.
Remote temperature sensor (Indoor/Outdoor).
OFF Local temp. Sensor enable/disable (only when Indoor Remote is
selected On).
On Selects Change filter feature
5