Sound Deadening Material Replacement - Husqvarna CR 65 2012 Workshop Manual

1
2
4
5
Workshop Manual Ed. 09-2011
SETTINGS AND ADJUSTMENTS
CR 65 2012

Sound deadening material replacement

Remove the silencer (1) as described in the relevant paragraph and fasten it on
a suitable support (vice provided with aluminium protections) having care not
to deform the pipe.
Remove screws (2) that retain the rear end cap (3) and remove it from the
3
silencer body.
Slide out the external pipe and remove the worn/damaged sound deadening
material.
Clean the pipe damaged by any residue of burnt material and oil using first a
wire brush and a compressed air jet then.
Wrap the damaged pipe up in the new sound deadening material (5), paying
utmost attention.
D.22