Gearbox Oil Filling Procedure - Husqvarna CR 65 2012 Workshop Manual

ENGINE REASSEMBLY
CR 65 2012

Gearbox oil filling procedure

– Screw the gearbox breather pipe to the engine casing.
– Screw the gearbox oil bleeding screw (1) with its new sealing ring, and tighten
to 12 Nm.
– Remove the oil filling screw from the clutch cover and fill in 0.50 l of gearbox
oil.
– Refit the oil filling screw.
1
H.11
Workshop Manual Ed. 09-2011