Canon SmartBase MPC600F Service Manual page 57

SmartBase MPC600F/MPC400 Chapter 3: Assembly and Disassembly
Disassembly 3. Flatbed ass'y
(1) Perform Disassembly 1.
(2) Remove the screw (a), and detach the grounding wire.
(3) Remove the cable (b), and free the cable from the core.
(4) Remove the cable (c).
(5) Remove the joint shaft. Be sure to free the claw (d) while doing so.
(6) Remove the left/right torsion bar.
(7) Remove the flatbed ass'y.
Disassembly 4. Operation panel unit
(1) Push the button, and open the flatbed ass'y.
(2) Remove the 5 screws (e).
(3) Free the cable (f) from the operation panel unit, and detach the operation panel unit.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
c
Flatbed ass'y
Joint shaft
d
f
e
Figure 3-10 Disassembly 3 and Disassembly 4
b
a
Torsion bar
e Button
3-12