Canon SmartBase MPC600F Service Manual page 119

SmartBase MPC600F/MPC400 Chapter 4: Maintenance & Service
#8 CLEAR
(Data initialization mode
#9 ROM
(ROM management)
#10 CS SET
SERVICE REPORT
TEST MODE
NOTE
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
TEL
USER SW
settings)
SERVICE SW
NCU
SERVICE DATA
REPORT
COUNTER
ALL
EC-XX-XX
SERVICE & SYSTEM
SERVICE DATA
SYSTEM DUNP
(See page 4-57)
Figure 4-19 Service Data (page 6)
If USER SW is selected from #8 CLEAR, the memory management of the user data is
not cleared. If TEL or SERVICE SW is selected, the memory management of the user
data is cleared.
For details on test mode, see 6.2 Service Test Functions on page 4-57 .
Dialling data initialization
User data and service data #1 to #3
initialization
User data and service data #1 to #3 and
#6 to #7 initialization
#4 NCU setting data initialization
Data on system dump list initialization
Data on activity report initialization
Total number of pages printed/scanned
All user data, service data, activity
management data, and image data
initialization (except COUNTER)
Version No. and Checksum display
4-40