Canon SmartBase MPC600F Service Manual page 123

SmartBase MPC600F/MPC400 Chapter 4: Maintenance & Service
[Bit 3]
Select whether to declare the V.8 protocol in DIS signal for reception (mainly caller manual
transmission). If NO is selected, the V.8 protocol cannot be used because it is not declared in DIS
signal.
[Bit 4]
Select whether the receiver falls back during V.34 reception. If OFF is selected, the receiver does
not fall back.
#2 MENU
No.
08
09
[No. 08]
Select the maximum baud rate for V.34 transmission: 3429, 3200, 3000, 2800, 2743, and 2400.
NOTE
[No.09]
Select the maximum transmission speed for V.34 transmission: 2400 to 33600 bps (2400 × n: 1 ≤ n
≤ 14).
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
Function
V.34 max. baud rate
V.34 max. transmission speed
This model cannot use 2743 baud due to its modem specificarion. If it is set to 2743 baud,
the maximum baud rate is 2400 baud.
Selection range
2400~3429
2400~33600
4-44
Default setting
3429 (3429 baud)
33600 (33600 bps)