Questions And Answers / Troubleshooting - Bifinett kh 2230 Operating Manual

QUESTIONS AND ANSWERS / TROUBLESHOOTING

Question
What should I do if the kneading blade
comes out with the bread?
Why does my bread sometimes have some
fl our on the side crust?
Why does the appliance fail to mix up
the dough? I can hear the motor running.
How long does it take to make bread?
Why can't I use the timer when baking
with fresh milk?
What will happen if there is power supply
failure in the middle of a cycle?
Why do I have to add the ingredients
in a certain order?
When setting the timer for the morning, why
does the machine make sounds late at night?
The bread machine makes loafs of what size?
The kneading blade is stuck in the baking
tin after baking. How do I get it out?
What is the wattage of the appliance?
Can I clean the baking tins in the dishwasher?
What will happen if I leave the fi nished
bread in the baking tin?
Answer
Remove it with a crochet hook or a sandwich pick
before slicing the bread. Since the blade can be
separated from the tin, the remaining of the kneading
blade is not due to a failure of the appliance.
Your dough might be too dry. Next time,
check your recipe and measuring. You may need to
add more liquid, 1/2 to 1 tablespoon at a time. You
can simply trim off that portion of the outer crust.
The kneading blade or baking tin may not be inserted
properly. Make sure the tin has clicked into its place.
See Cycle Times Chart.
The milk will get spoiled if it is left in the machine
too long. Perishable ingredients, such as eggs and
milk, should never be used when working with the
timer feature.
If the power supply failure does not last longer than
approximately 10 minutes, the bread machine resumes
its cycle at the stage in which the interruption took place.
This allows the bread machine to mix the ingredients
in the most effi cient manner possible. When using the
timer, it also keeps the yeast from combining with the
liquid before the dough is mixed.
The machine must start operating several hours
before the bread will be ready. So these sounds are
made by the motor when kneading the dough. It is a
normal operation, not a malfunction.
Your bread machine makes 1-pound loaves of bread.
If the kneading blade gets stuck, pour hot water into
the baking tin. Rotate the kneading blade to remove
any incrustrations that may have devloped underneath.
Please refer to the rating label on the machine.
No. The baking tins and kneading blades must be
washed by hand. Do not immerse the tins into water.
The keep warm cycle will keep it warm and thus
prevent it from becoming soggy for 1 hour. If the bread
is left in the tin longer than 1 hour, it may start to
become soggy.