Toshiba e-studio 350 User Manual page 6

BASIC Window (Cont'd.)
Finishing/Stapling
When the finisher (optional) is installed, you can perform automatic stapling for every set.
Three staple positions can be selected when installing the saddle-stitch finisher (MJ-1024)
or multi-staple finisher (MJ-1023).
1. Place paper in the drawer(s).
2. Place the original(s).
3.
Press the Finisher button on the basic menu as shown
in the illustration on the right (highlighted).
4. Press the FRONT STAPLE-1 (or DOUBLE STAPLE,
REAR STAPLE) button. Only the FRONT STAPLE-1
button is available when installing the single-staple
finisher (MJ-1022). Select other copy modes as
required.
5. Press the START button.
Page 4
Example of selecting the FRONT STAPLE-1 button