Epson EPL-5900 Service Manual page 128

EPSON EPL-5900/EPL-5900L
7. Remove the terminal board. (Two screws) (See Figure 4-21)
8. Pull out the Heater Lamp.
Do not touch the glass of the lamp with bare hands.
C A U T I O N
When installing the Heater Lamp, install it so that the Voltage
Indicator faces the gear side.
9. Remove the drive gear from the Heat Roller. (See Figure 4-22)
10. Shift the Heat Roller to the right (1) once and then move it in the (2) direction, and pull
the roller out in the (3) direction.
To avoid scratching the heat roller surface by the fusing separation
C A U T I O N
claw, when removing or installing the roller, keep the fusing separation
claw lifted untouched. Take great care not to scratch the surface of the
Heat Roller.
Disassembly and Assembly Disassembly and Reassembly of the Printer Body
Heater Lamp
Voltage Indicator
Figure 4-21. Heater Lamp Removal
Figure 4-22. Heat Roller Removal
Revision B
1305
3704
111