Requirements And Software Installation; Installing The Scanner Drivers - Kodak i50 User Manual

Requirements and software installation

Installing the
scanner drivers
10
To operate the scanner at its optimum speed, the following minimum configuration is
required.
NOTE: The actual performance of the system depends on the scanning application,
choice of scanning parameters, and the PC configuration. If the scanner is not
performing at the optimal speed, using a faster PC and/or more RAM may be
necessary to obtain the rated throughput.
IBM PC (or compatible) with a Pentium 933 MHz processor
Microsoft Windows 95, Windows 98, Windows NT 4.0, Windows 2000, or
Windows Millennium Edition (Me)
100 MB of available hard disk space (200 MB is recommended)
128 MB of RAM
Monitor (VGA)
Mouse
CD-ROM drive
1. Start your PC and Windows application.
2. Insert the KODAK i50/i60 Scanner CD that contains the device drivers in your
CD-ROM drive.
NOTE: If the CD does not start automatically, click on the Start button and choose
Run, then type d:\driver\setup.exe (where "d" is the letter of your CD-ROM
drive). Click on the OK button.
3. Follow the instructions on the screen to complete the driver installation.
A-61182 October 2001