Table of Contents
Advertisement
General Issues
No power.
The unit does not turn on pressing
[^ DVD/VHS].
The unit switches to standby
mode.
The unit is turned off automatically.
General Issues
The display is dim.
"0:00" is flashing on the unit's
display.
The clock is not correct.
The displayed time of this unit is
different from the actual recording
time or MP3 recording time.
Compared to the actual recorded
time, the elapsed time displayed
is less.
(Only when recording in NTSC)
The tape counter is not changing.
The clock does not display on the
unit when switched to standby.
Downloaded From Disc-Player.com Panasonic Manuals
Power
•
Insert the AC mains lead securely into a known active household mains
socket.
•
Linked timer recordings with external equipment is in recording standby
("EXT-L" on the unit's display blinks when [^ DVD/VHS] is pressed). Press
[EXT LINK] to cancel the recording standby.
•
One of the unit's safety devices is activated. Press [ 8 ] on the main unit to
turn the unit on.
•
If you connected this unit to an "HDAVI Control" compatible TV with an HDMI
cable, or connected this unit to a Q Link-compatible TV with a fully wired 21-
pin Scart cable, this unit will be automatically set to standby mode when the
TV is set to standby mode.
Displays
•
Change "FL Display" in the Setup menu.
•
Set the clock.
•
Under adverse reception conditions, etc., the automatic time correction
function may not work. In this case, "Automatic" is automatically turned to
"Off". If re-setting the Auto Clock Setting does not work, set the time manually.
•
Times shown may disagree with actual times.
-R -R DL +R +R DL
•
are deleted.
•
Available space on a DVD-RW (DVD-Video format) or +RW disc increases
when you delete the last title (space may increase slightly when you delete
other titles).
•
If you record or edit about 200 times or more, the remaining capacity of DVD-
R, DVD-R DL, +R, and +R DL is reduced and then recording or editing may
be disabled (for the second layer on DVD-R DL and +R DL, this happens after
about 60 times).
•
The time during searching may not be displayed accurately.
•
The displayed recording/play time is converted from the number of frames at
29.97 frames (equal to 0.999 seconds) to one second. There will be a slight
difference between the time displayed and the actual elapsed time (e.g.,
actual one-hour elapsed time may display as approximately 59 minutes 56
seconds). This does not affect the recording.
•
The tape counter does not change while playing unrecorded parts. The
"second" display changes as follows:
(e.g., Blank after 1 h 36 min)
•
The unit's display also appears like this if the tape is dirty or damaged.
Consult your dealer if this is the case.
•
Ensure "Power Save" is set to "Off".
The remaining capacity does not increase even if titles
Page
10, 11,
86
31
−
50
Page
82
14
14
−
−
−
−
−
−
−
−
84
95
RQT9089
Advertisement
Table of Contents
