SOYO SY-6BA+100 User Manual page 97

Drivers installation
Select which driver you want to install and click OK, or click Cancel to
abort the driver installation and return to the main menu.
l
Core voltage
The core voltage differs between generations of Intel CPUs, if the
Hardware monitor gives a warning, the settings for the safe range of the
core voltage has to be adjusted. This can be done by simply clicking and
dragging the upper and lower limit bars.
For example:
Newer Slot 1 CPUs have a core voltage of 2.0V. Therefore, set the CPU
Vcore limits to 1.8V and 2.2V. For 2.8V core voltage CPUs the limits
would be 2.6V and 3.0V.
l
Fan speed
The Hardware monitor can keep track of three fans. If the user does not
use all fans, the fans that are not in use should be disabled in the Hardware
monitor program, otherwise the Hardware monitor will give an alarm. If
this happens, make sure to disable monitoring for that fan.
Step 3. Check the Latest Releases
Click the 'Check the latest Releases' button to go the SOYO Website to
automatically find the latest BIOS, manual and driver releases for your
motherboard. This button will only work if your computer is connected to
the internet through a network or modem connection. Make sure to get
your modem connection up before clicking this button.
Step 4. Select which driver you want to install and click
OK
Notice 1: Once you have selected a driver, the system will automatically exit
the SOYO CD to begin the driver installation program. When the
installation is complete, most drivers require to restart your system
before they can become active.
Notice 2: You may click Cancel to abort the driver installation and return to
the main menu.
93
SY-6BA+100