SOYO SY-6BA+100 User Manual page 63

BIOS Setup Utility
Quick CPU Frequency Setup (Continued)
Quick CPU
Frequency Setup
If [CPU Frequency] field is set to [Manual]
CPU Ratio
AGP Clock
Vcore voltage
Adjust
Setting Description
After you have selected the host clock, choose the right
multiplier for the CPU. Options are: [3., 3.5, 4, 4.5, 5,
5.5,6,6.5,7.0,7.5,8.0]. The CPU frequency is then defined
as [host clock freq.]x[multiplier], and should the working
frequency of your Pentium
processor.
Auto
/ 1 This option allows you to manually adjust the
AGP host bus clock frequency to a value
/ 1.5
determined as a fraction of the CPU host clock.
For example:
With a CPU front side bus of 66MHz,
[/ 1] sets à
[ / 1.5] sets à
Normal
+2.5 % The CPU notifies the board of what core
voltage it requires by its VID outputs. The
+5.0%
on-board voltage regulator uses the VID
+7.5 %
code to set the core voltage. If the Vcore
+10.0%
Voltage adjust is set to normal, the Vcore
will be exactly what the VID code
specifies. If an adjustment percentage is
selected the Vcore will be that percentage
higher than the VID code specifies. If for
instance the VID code specifies 2.0V and
the Vcore Voltage Adjust is set to +10.0%
the actual CPU voltage will be 2.2V. This
function should only be used if the CPU is
running on FSB Frequencies beyond the
CPu specifications.
59
SY-6BA+100
® ®
III, Pentium II & Celeron™
AGP Clock = 66MHz
AGP Clock = 44MHz
Note
Default
Default