Pnp/Pci Configuration Controls - SOYO SY-6BA+100 User Manual

BIOS Setup Utility

3-6.1 PNP/PCI Configuration Controls

PNP/PCI
Controls
Resources
Controlled By
Reset
Configuration
Data
3-6.2 PNP/PCI Configuration Setup
PNP/PCI Setup Setting
If [Resources Controlled By] is set to [Manual]
IRQ-# and
DMA-#
assigned to:
Under this item the user can assign an IRQ to a PCI slot. However, there under
some conditions the IRQ will not be assigned as selected under this item:
1. IRQs 0, 1, 2, 6, 8, 13 can NOT be assigned, because they are fixed.
2. IRQs 5, 9, 10, 11 are available
3. IRQs 3,4,7,12,14 and 15 will only be assigned if they are free. See the table
below on how to free them:
Setting Description
Manual BIOS does not manage PCI/ISA PnP
card IRQ assignment.
Requires to assign IRQ-# and DMA-# to PCI or
ISA PnP manually.
IRQ-3,4,5,7,9,10,11,12,14,15 assigned to: _
DMA-0,1,3,5,6,7 assigned to: _
Auto The Plug-and-Play BIOS
auto manages PCI/ISA PnP
card IRQ assignment
automatically.
Disabled Retain PnP configuration
data in BIOS.
Enabled Reset PnP configuration data
in BIOS.
Description
PCI/ISA PnP Choose IRQ-# and
DMA-# assigned to
PCI/ISA PnP card.
Legacy ISA Choose IRQ-# and
DMA-# assigned to
Legacy ISA card.
79
SY-6BA+100
Note
Recommended
Default
Note
IRQ-3,4,5,7,9,10,
11,12,14,15
DMA-0,1,3,5,6,7
IRQ-3,4,5,7,9,10,
11,12,14,15
DMA-0,1,3,5,6,7