SOYO SY-6BA+100 User Manual page 84

BIOS Setup Utility
PNP/PCI Configuration Setup (Continued)
PNP/PCI Setting
Setup
How to set the BIOS to release the IRQ to the PnP Interrupt pool:
Interrupt
Line PnP / PCI configuration
IRQ 15 IRQ 15: PCI / ISA PnP On-Chip Secondary PCI IDE: disabled
IRQ 14 IRQ 14: PCI / ISA PnP On-Chip Primary PCI IDE:
IRQ 12 IRQ 12: PCI / ISA PnP
IRQ 7 IRQ 7:
IRQ 4 IRQ 4:
IRQ 3 IRQ 3:
4. Your OS may reassign another interrupt to a PCI slot after BIOS passes control
to the OS, especially if you use Windows 95, 98 or NT.
Auto
Slot 1/2/3/4
Use IRQ NO.
Used MEM Memory
length
base addr
Enabled
Assign IRQ
For USB
Disabled BIOS won't assign IRQ for
PnP OS Yes
Installed
No
Description
Integrated Peripherals
Interrupt 12 will be released by the PnP
BIOS automatically if the PS/2 Mouse Port
is not used.
PCI / ISA PnP Onboard parallel port: disabled
PCI / ISA PnP Onboard Serial port 1: disabled
PCI / ISA PnP Onboard Serial port 2: disabled
Select one of the interrupts.
Note: The selected IRQ will
only be assigned if it is
available. (Windows may
reassign IRQs).
8K,16K,32K,64K.
(Please ask your card provider
for the exactly memory length
of this add-on card.)
BIOS will assign IRQ for
USB port.
USB port.
Set this field to [Yes] if you
are running Windows 95,
which is PnP compatible.
If the OS you are running
does not support PnP
configuration.
80
SY-6BA+100
Note
disabled
Default
This item
appears only
when the [Based
MEM base
addr] set to I/O
address.
Default
Default
(If there is any
doubt, set this
field to [No])