I/O Interface Controller - SOYO SY-6BA+100 User Manual

Pentium iii, pentium ii & celeron processor supported 82440 bx agp/pci motherboard 66 & 100 mhz front side bus supported atx form factor
Hide thumbs Also See for SY-6BA+100:
Table of Contents

Advertisement

Motherboard Description
recognize it as both the A and B drive
1-9.6 Real-Time Clock, CMOS SRAM, and Battery
The real-time clock is compatible with DS1287 and MC146818
components. The clock provides a time-of-day clock and a multicentury
calendar with alarm features and century rollover. The real-time clock
supports 256 bytes of battery-backed CMOS SRAM in two banks that are
reserved for BIOS use.
The time, date, and CMOS values can be specified in the Setup program.
The CMOS values can be returned to their defaults by using the Setup
program.

1-10 I/O INTERFACE CONTROLLER

The motherboard uses the ITE 8671 super I/O controller which features:
l
Single diskette drive interface
l
ISA Plug-and-Play compatible register set
l
Two serial ports
l
FIFO supports on both serial and diskette interfaces
l
One parallel port with Extended Capabilities Port (ECP) and
Enhanced Parallel Port (EPP) support
l
PS/2 style mouse and keyboard interfaces
l
PCI PME interface
l
Vialigent auto power management, including:
Ø
Shadowed write-only registers for ACPI compliance
Ø
Programmable wake-up event interface
The Setup program provides configuration option for the I/O controller.
1-10.1 Serial Ports
The NS16C5450-compatible UARTs support data transfers at speeds up to
115.2 Kbits/sec with BIOS support.
1-10.2 Parallel Port
In the Setup program, there are four options for parallel port operation:
l
Compatible (standard mode)
16
SY-6BA+100

Advertisement

Table of Contents
loading

Table of Contents