SOYO SY-6BA+100 User Manual page 103

The ATA 66 Driver installation
with the last known good configuration: Press spacebar NOW to
invoke the Last Known Good menu
3. Once your computer is operational again, check all of the
hardware and software configuration changes you want to make.
Look specially for conflicts with parts of the existing system
configuration that are not being changed.
If Windows NT can boot but the driver has not been started (see Checking
the Installation), please check the following:
1. Make sure the host adapter is properly installed, and the device is
correctly connected to the adapter. Double check that the cable
between the adapter and the devices is correctly attached. Also
check if the jumper setting on the drive is correct.
2. Make sure that a power cable is properly attached to each drive
attached to the HPT370 host adapter.
If the driver has started and you still cannot access the hard disk drive
attached to the HPT370 host adapter, the hard disk drive might have not
been partitioned and formatted yet. You may need to partition and format
it.
New Driver releases and Support
If you have questions about installing or using this HighPoint product,
check this user's guide or the readme file first, you will find answers to
most of your questions here. If you need further assistance, we offer the
following support and information services:
1. The Web Site provides information on software upgrades,
answers to common questions, and other topics. The Web Site is
available from Internet 24 hours a day, 7 days a week, at
http://www.highpoint-tech.com.
2. For technical support, send an e-mail to support@highpoint-
tech.com.
NOTE: Before you send an e-mail, please visit our Web Site (http://www.highpoint-
tech.com) to check if there is a new or updated HPT370 device driver for your
operating system.
99
SY-6BA+100