Onboard Parallel Ports - SOYO SY-6BA+100 User Manual

BIOS Setup Utility

3-8.5 Onboard Parallel Ports

Onboard Parallel
Ports
Onboard Parallel
Port
Parallel Port Mode
If [Parallel Port Mode] is set to [ECP] mode
ECP Mode use
DMA
If [Parallel Port Mode] is set to [EPP] mode
EPP Mode Select
PWRON After
PWR-Fail
Setting Description
378H/IRQ7 Choose the printer I/O
address.
3BCH/IRQ7
278H/IRQ5
ECP/EPP The mode depends on your
external device that
SPP
connects to this port.
ECP
EPP/SPP
3 Choose DMA3
1 Choose DMA1
EPP 1.9 Select EPP port type 1.9
EPP 1.7 Select EPP port type 1.7
On The system will switch on
when power comes back
after a power failure.
Off The system will remain off
when power comes back
after a power failure.
Former-sts The system will return to
the state it was in before the
power failure when power
returns. (i.e: If the system
was on, it will switch on
again, if it was off, it will
remain off)
85
SY-6BA+100
Note
Default
Default
Default
Default
Default