Adjusting the Printing and Cutting Positions
When printing is followed by cutting, the cutting line may be displaced from the printing.
If this happens, use the display menu's [PRINT-CUT ADJ.] function to align the printing and cutting positions.
Adjusting Automatically
1
Load some material and press the [SETUP] key.
3
Press the [
] key to make the following screen
appear on the display.
PRINT-CUT ADJ.
TEST PRINT
5
Press the [ENTER] key to print crop marks and read
the crop marks automatically.
While automatic adjustment is in progress, the
following message appears on the display.
NOW PROCESSING...
• Depending on the type of material, the crop mark may not be read accurately.
• If you're using dye-based inks, automatic adjustment is not possible.
Follow the steps in "Adjusting Manually" on the next page.
2
4
6
Rear
Front
Crop mark
Press the [MENU] key and [
following screen appear on the display.
Press the [
] key to make the following screen
appear on the display.
PRINT-CUT ADJ.
AUTO
When the following message appears, automatic
adjustment is finished.
PRINT-CUT ADJ.
COMPLETED!!
User's Reference
] key to make the
MENU
PRINT-CUT ADJ.
55