D-Link DES-1210-08P Reference Manual page 75

4 Configuration
Click Next button then the ACL profile is added.
To define the IPv4 ACL UDP Rule: Select IPv4 ACL with UDP and click Next button. The updates to show
the follows:
IPv4 Address: Defines the range of source Ports relevant to the ACL rules.
Source: Defines the range of source Ports relevant to the ACL rules. For example, to set 0 – 15, set mask of
FFF0.
Destination: Defines the range of destination IP addresses, relevant to the ACL rules. For example, to set
0 – 15, set mask of FFF0.
Click Next button then the ACL profile is added.
To define the IPv6 ACL ICMP rule: Select IPv6 ACL with ICMP of Protocol Type and click Next button.
The updates to show the follows:
Figure 4.102 - Add Access Rule – IPv4 UDP
NOTE: A combination of one or several filtering
masks can be selected simultaneously. The page
updates with the relevant field(s).
70
DES-1210 Series Switch Web UI Reference Guide