Vlan > 802.1Q Vlan Pvid; Vlan > 802.1Q Management Vlan; Vlan > Voice Vlan > Voice Vlan Global Settings - D-Link DES-1210-08P Reference Manual

4 Configuration
The VLAN settings of this example are:
VLAN 1: default VLAN 1, including all ports with untagged.
VLAN 2: Member ports are untagged port 5, 15-18, 20.
VLAN 3: Member ports are untagged port 6, 15-18, 20.
VLAN 4: Member ports are untagged port 7, 15-18, 20.
VLAN > 802.1Q VLAN PVID
The 802.1Q VLAN PVID setting allows user to configure the PVID for each ports. The purpose of assigning
PVID is to make sure the untagged packets will be transmitted correctly. Click Apply to implement changes
made.
VLAN > 802.1Q Management VLAN
The 802.1Q Management VLAN setting allows you to transfer the authority of the switch from the default
VLAN to others created by users. This allows managing the whole network more flexible.
By default, the Management VLAN is disabled. You can select any existing VLAN as the management VLAN
when this function is enabled. There can only be one management VLAN at a time. Click Apply to
implement changes made.
VLAN > Voice VLAN > Voice VLAN Global Settings
Voice VLAN is a feature that allows you to automatically place the voice traffic from IP phone to an assigned
VLAN to enhance the VoIP service. With a higher priority and individual VLAN, the quality and the security of
VoIP traffic are guaranteed. If a VoIP packet comes with a VLAN tag, the Voice VLAN function won't replace
the original VLAN tag.
Figure 4.38 – VLAN > 802.1Q VLAN – Create VLANs
Figure 4.39 – VLAN > 802.1Q VLAN PVID
Note: When Asymmetric VLAN is enabled, IGMP
Snooping, Management VLAN, and MAC address
table will be reset to default.
Figure 4.40 – VLAN > 802.1Q Management VLAN
34
DES-1210 Series Switch Web UI Reference Guide