Auto White Balance & Lv Standard Data Input - Sony Handycam CCD-TRV107 Service Manual

7. Auto White Balance & LV Standard Data Input
Adjust the white balance reference at 3200K, and adjust the normal
coefficient of the light value.
Subject Clear chart
(Color reproduction adjustment frame)
Adjustment Page F
Adjustment Address 34 to 39
Note1: This adjustment should be carried out upon completion of "Color
reproduction adjustments".
Note2: After the power is turned on, this adjustment can be done only
once.
Note3: Check that the data of page: 6, address: 02 is "00". If not, to page:
6, address: 01, set data: 00, and press the PAUSE button.
Switch setting:
1) NIGHT SHOT (Lens block) ............................................ OFF
2) DIGITAL ZOOM (Menu display) ................................... OFF
3) STEADY SHOT (Menu display) ..................................... OFF
4) LIGHT (FK-2000 block) .................................................. OFF
Adjusting method:
Order Page Address Data
1 0 01 01
2
3 6 01 11
4 6 01 0D
5 6 02
Note4: The adjustment data will be automatically input to page: F, address:
34 to 39.
Processing after Completing Adjustments
Order Page Address Data
1 6 01 00
2 0 01 00
3
Procedure
Set the data.
Wait for 2 sec.
Set the data, and press PAUSE
button.
Set the data, and press PAUSE
button
Check that the data changes to
"01". (Note4)
Procedure
Set the data, and press PAUSE
button.
Set the data.
Perform "Auto White Balance
Adjustment".
CCD-TRV107/TRV108/TRV308/TRV408/TRV608
5-17