CCD-TRV107/TRV108/TRV308/TRV408/TRV608
2-3. VF-150, LB-073 BOARDS (TRV107/TRV308/TRV408/TRV608)
B
4 Claw
[VF-150, LB-073 BOARDS SERVICE POSITION]
VF-150 board
VF lens (B) assembly
1 Raise the EVF in the A direction and
slide it in the B direction.
A
Two tapping screws
2
(B2 × 5)
5 EVF cabinet upper
q; Lamp guide
qa LB-073 board
qs VF-150 board
LB-073 board
AC power
adaptor
Info lithium battery
(L series)
Adjustment remote
commander (RM-95)
7 VF lens (B) assembly
6 Two claws
8 Caution
9 Two claws
Before disengaging the 2 claws in step 7 , hold
the EVF lens facing downward and then disengage
the 2 claws very slowly and carefully so that the
internal 2 plastic sheets must not drop. Keep
them in place with an appropriate piece of sheet so
that hey do not drop out of their positions.
3 EVF cabinet rear assembly
AC IN
CPC-jig for SB
(J-6082-539-A)
2-4