Cooking; Setting The Temperatures; Setting The Timers - TurboChef fire Owner's Manual

Cooking

1. Press the On/Off key to turn the oven on.
2. Allow the oven to warm up. The green light in the bottom-left corner of the Upper Temperature
Display and the Lower Temperature Display will blink during warmup. Once the oven has finished
warming up, the lights will stop blinking and stay solid.
3. Open the oven door and using the provided paddle and cooking screen, slide the product into
the oven and close the oven door.
4. Press the desired timer (1 through 6).
NOTE: Once the timer reaches 0, the oven will begin beeping. To stop the beeping, press any of the
Time Preset keys.
5. Open the oven door and remove the product from the oven and close the oven door.
CAUTION: Dish and inside of oven/oven door are hot!
6. When finished cooking for the day, press the On/Off key to turn the oven off and begin cooling down.

Setting the Temperatures

Two different temperatures can be set: one for the upper heating zone and one for the lower heating zone.
These temperatures range from off to 842°F (450°C).
NOTE: When a temperature is set to off, the display will read 32°F (0°C).
To set the temperature:
1. While the oven is on, press the Temperature key to access the upper temperature (the upper
temperature will begin flashing).
2. Use the Up and Down keys to set the upper temperature.
3. Press the Temperature key again to save the upper temperature and to access the lower temperature.
4. Use the Up and Down keys to set the lower temperature.
5. Press the Temperature key again to save the lower temperature.
NOTE: If changing only one temperature, simply press the Temperature key to bypass the upper or lower
temperature without changing it.

Setting the Timers

Six different timers can be set to accommodate different items.
To set a timer:
1. Make sure no timers are running.
2. While the oven is on, press and hold the desired timer button (1 through 6) for two seconds. The value
indicated on the Time display will begin flashing.
3. Use the Up and Down keys to set the time.
4. Press and hold the same timer button for two seconds to save the time.
NOTE: If you wait five seconds without pressing any buttons, the timer will save automatically.
To pause a timer:
- Press any of the Time Preset keys. The time on the Time Display will flash to indicate the timer
is paused.
- To resume the timer, press any of the Time Preset keys again.
- To reset the timer to 0, press and hold any of the Time Preset keys for two seconds. The oven will
begin beeping to indicate the timer has reached zero. To stop the beeping, press any of the Time
Preset keys.
7